RE: Rock jobs running multiple times again
Hi Amy – I have you set =
to reboot tomorrow morning @ 4:00AM Eastern.
From: Amy Fewkes <afewkes@thecompass.net> =
Sent: Wednesday, August 23, 2023 10:56 AM
To: =
jones@rmrdevelopment.com; Michael Reed =
<reed@rmrdevelopment.com>
Subject: Rock jobs running =
multiple times again
Some of our =
Rock jobs are running multiple times again. Can we schedule a =
server reboot to fix the issue?
Someone =
posted about this issue in Rocket Chat troubleshooting channel =
yesterday, but I didn’t see any good solutions. =
Amy Fewkes
Director of Information Technology
The Compass Church
P| 630.753.1973
thec=
ompass.net
RE: Test System
Hi Mariea – We can =
probably assist you. You have time this week to set up a call to discuss =
exactly what you want? We are mostly open this week. =
Thanks!
From: Mariea English =
<mariea.english@highview.org>
Sent: Monday, August 21, =
2023 10:32 AM
To: jones@rmrdevelopment.com; Michael Reed =
<reed@rmrdevelopment.com>; info@rmrdevelopment.com
Cc: =
Ben Putman <BPutman@highview.org>; Joseph Merritt =
<Joseph.Merritt@highview.org>
Subject: Re: Test =
System
Is there any =
information on this?
Thanks,
Mariea =
From: Mariea English <mariea.english@highview.org>
Sent: Wednesday, August 9, 2023 4:17 PM
To: =
jones@rmrdevelopment.com =
<jones@rmrdevelopment.com>=
Cc: Ben Putman <BPutman@highview.org>; =
Joseph Merritt <Joseph.Merritt@highview.org>
Subject: Test System
I am contacting =
you to discuss potentially establishing a Rock test system within Azure. =
Additionally, I am interested in exploring the possibilities of =
addressing our legacy lava. Could you kindly confirm whether you are the =
appropriate person to engage in this =
discussion?
Thanks,
Mariea =
English
Highview =
Baptist Church
502.232.6250
Mariea.English@HighView.org
=
DPK/RMR Update
DPK/RMR Update
RE: [Reminder: Referrals Invite] Repack Acards
I=E2=80=99ll look right =
now.
From: Oscar Rasmussen =
<oscar.rasmussen@swipejobs.com>
Sent: Wednesday, August =
16, 2023 8:56 AM
To: Aaron Jones =
<jones@rmrdevelopment.com>; Michael Reed (reed@rmrdevelopment.com) =
<reed@rmrdevelopment.com>
Cc: Fernando Landa =
<fernandolanda@dpksi.com>
Subject: [Reminder: Referrals =
Invite] Repack Acards
Good =
Morning Aron and Mike,
We are looking at the attendance and to see who =
is on an ACARD or not, for some reason everyone that is working on =
a Repack Acard show is not being on =
one.
At the moment we have the following employees working =
Repack Acards.
Cecilia Gonzalez
Erika Sanchez
Sonia Colinres
Rosa Casimiro
Adriana Marin
Rosalba Valdez
Could you please take a look at it and let us =
know.
Thank =
you
FW: rough estimate
This is a multipart message in MIME format.
——=_NextPart_000_00EC_01D9CF7E.6241D210
Content-Type: multipart/alternative;
boundary=”—-=_NextPart_001_00ED_01D9CF7E.6241D210″
——=_NextPart_001_00ED_01D9CF7E.6241D210
Content-Type: text/plain;
charset=”us-ascii”
Content-Transfer-Encoding: 7bit
I’m guessing this won’t take too long?
From: Shea Bates
Sent: Tuesday, August 15, 2023 1:40 PM
To: Michael Reed
Subject: Re: rough estimate
We will need to update the colors and logo and change any “Kensington” to
“Crossline Community Church”. Also:
* “What team are you applying to volunteer in” needs to be changed to
” What crew are you applying to volunteer in”
* Team names need to be changed as follows:
* Guest Services is now Welcome Crew
* KKids Ministry is now Kids Crew
* Student Ministry is now Middle Crew/High School Crew
* Arts and Production is now Production Crew and then Worship Crew
* Hospitality Crew is now Breakfast Crew
* Take off Care and/or Prayer
* Portability is now Line Crew
* And Events is now Events Crew
* Take our the “Have you attended a Discovery Kensington Session
And can we rename it “Crew Member Application” ?
Shea Bates | Executive Assistant
K E N S I N G T O N C H U R C H O R
L A N D O
Office: 407.554.1210 | Mobile: 407.694.7274
From: Michael Reed <reed@rmrdevelopment.com
>
Date: Tuesday, August 15, 2023 at 1:34 PM
To: Shea Bates <sbates@kensingtonorlando.org
>
Subject: RE: rough estimate
Sure! What do you want to update/add-on?
From: Shea Bates <sbates@kensingtonorlando.org
>
Sent: Tuesday, August 15, 2023 12:02 PM
To: Michael Reed <reed@rmrdevelopment.com >
Subject: Re: rough estimate
Hi! Can we add on to update our Volunteer Application, as well?
Shea Bates | Executive Assistant
K E N S I N G T O N C H U R C H O R
L A N D O
Office: 407.554.1210 | Mobile: 407.694.7274
From: Shea Bates <
sbates@kensingtonorlando.org>
Date: Thursday, August 10, 2023 at 12:10 PM
To: Michael Reed < reed@rmrdevelopment.com>
Subject: Re: rough estimate
Hi Michael,
Sounds great! Thank you! And Kevin is able to give access to server. I will
make sure that happens by early next week.
Shea Bates | Executive Assistant
K E N S I N G T O N C H U R C H O R
L A N D O
Office: 407.554.1210 | Mobile: 407.694.7274
From: Michael Reed <
reed@rmrdevelopment.com>
Date: Thursday, August 10, 2023 at 8:22 AM
To: Shea Bates <
sbates@kensingtonorlando.org>
Subject: rough estimate
Good morning Shea
Just an FYI, we estimate this project to take about 4 hours at a rate of
$125/hour. We will bill it as time/material and let you know if the estimate
is to exceed by more than 10%. If it comes under 4 hours, you will only be
billed for the hours used. Let me know if you have any questions.
Sincerely
Michael Reed
RMR Development
reed@rmrdevelopment.com
o: 330-343-3454 x1001
m: 330-795-0442
——=_NextPart_001_00ED_01D9CF7E.6241D210
Content-Type: text/html;
charset=”us-ascii”
Content-Transfer-Encoding: quoted-printable
v\:* =
{behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
I’m guessing this =
won’t take too long?
From: Shea Bates =
<sbates@kensingtonorlando.org>
Sent: Tuesday, August =
15, 2023 1:40 PM
To: Michael Reed =
<reed@rmrdevelopment.com>
Subject: Re: rough =
estimate
We will need =
to update the colors and logo and change any “Kensington” to =
“Crossline Community Church”. Also:
- “What team =
are you applying to volunteer in” needs to be changed to “ =
What crew are you applying to volunteer in” - Team names need to be changed as follows:
- Guest Services is =
now Welcome Crew - KKids Ministry is =
now Kids Crew - Student Ministry is =
now Middle Crew/High School Crew - Arts and Production is now Production Crew and then Worship =
Crew - Hospitality Crew is =
now Breakfast Crew - Take off Care =
and/or Prayer - Portability is now =
Line Crew - And Events is now =
Events Crew - Take our the =
“Have you attended a Discovery Kensington =
Session
And can we rename it “Crew Member =
Application” ?
Shea Bates | =
Executive =
Assistant
K E N S I N G T O N C H U R C H O R L A N D =
O
Office: 407.554.1210 | Mobile: 407.694.7274
From: Michael Reed <reed@rmrdevelopment.com>Date: Tuesday, August 15, 2023 at 1:34 PM
To: Shea =
Bates <sbates@kensingtonorlando.org=
>
Subject: RE: rough =
estimate
Sure! What do =
you want to update/add-on?
From: Shea Bates <sbates@kensingtonorlando.org=
>
Sent: Tuesday, August 15, 2023 12:02 =
PM
To: Michael Reed <reed@rmrdevelopment.com>Subject: Re: rough estimate
Hi! Can we =
add on to update our Volunteer Application, as well?
Shea Bates | =
Executive =
Assistant
K E N S I N G T O N C H U R C H O R L A N D =
O
Office: 407.554.1210 | Mobile: 407.694.7274
From: Shea Bates <sbates@kensingtonorlando.org>
Date: Thursday, =
August 10, 2023 at 12:10 PM
To: Michael Reed <reed@rmrdevelopment.com>
Subject: Re: rough =
estimate
Hi Michael, =
Sounds great! Thank you! And Kevin is able to give =
access to server. I will make sure that happens by early next week. =
Shea Bates | =
Executive =
Assistant
K E N S I N G T O N C H U R C H O R L A N D =
O
Office: 407.554.1210 | Mobile: 407.694.7274
From: Michael Reed <reed@rmrdevelopment.com>
Date: Thursday, =
August 10, 2023 at 8:22 AM
To: Shea Bates <sbates@kensingtonorlando.org>
Subject: rough =
estimate
Good morning =
Shea
Just =
an FYI, we estimate this project to take about 4 hours at a rate of =
$125/hour. We will bill it as time/material and let you know if the =
estimate is to exceed by more than 10%. If it comes under 4 hours, you =
will only be billed for the hours used. Let me know if you have any =
questions.
Sincerely
Michael =
Reed
RMR Development
o: 330-343-3454 x1001
m: 330-795-0442
——=_NextPart_001_00ED_01D9CF7E.6241D210–
——=_NextPart_000_00EC_01D9CF7E.6241D210
Content-Type: image/png;
name=”image001.png”
Content-Transfer-Encoding: base64
Content-ID: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——=_NextPart_000_00EC_01D9CF7E.6241D210–
DPK/RMR Update
FW: GoToMeeting Invitation – DiPk/RMR
From: James Hartzler =
<jameshartzler@dpksi.com>
Sent: Friday, July 28, 2023 =
2:10 PM
To: Michael Reed <reed@rmrdevelopment.com>; =
Aaron Jones <jones@rmrdevelopment.com>; Fernando Landa =
<fernandolanda@dpksi.com>; Jennifer Hernandez =
<JenniferHernandez@dpksi.com>
Cc: Jack Hartzler =
<jackhartzler@dpksi.com>
Subject: RE: GoToMeeting =
Invitation – DiPk/RMR
Next meeting will be Fri 08/11 @ 11:00am EST / =
10:00am CST.
See below for updates =
from 07/28 meeting.
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update 07/28 – We need =
to use transaction reports to review the accuracy of our inventory =
counts. Mike and =
Aaron to review inventory system daily and to aid in the implementation =
and accuracy of our recipes and data entry. On site visit may be =
required.Aaron to =
modify the woodshop usage entry screen to include shipping number from =
billing so we can accurately track time, material, and quantity of units =
made reported with quantity of units billed – what they make =
should always match what we say we billed – just ask each week if =
everything tied or if there were any =
discrepancies.Mike =
& Aaron to add a work in process bucket to woodshop that will move =
the amount of lumber needed per the a-card’s recipe out of =
inventory and in to a work in process bucket. Once the a-card is =
completed the lumber used would be removed from the work in process =
bucket and not from inventory.Fernando, Mike, and Aaron will work on a process where Fernando =
and team report daily what they check out of the inventory in whole =
pieces. We will use this data to help us validate recipes and scrap =
rates.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate 07/28 – Mike and =
Aaron to think through how we can see who is idle in real time and which =
a-cards are active and who is currently assigned to =
them.Now =
getting report from Swipejobs each morning of who is at work so we can =
report that to the RMR system and in return the RMR system can tell us =
who is not actively on an a-cardMike to =
highlight anyone that is on an a-card but is missing a clock in =
transaction so we can either remove them from the a-card or go ahead and =
manually process a clock in transaction for them – Mike to release =
that today
Start =
using system to review direct labor costs for parts – using the =
system to help us quote the business.Incentive system
Thanks,
James
From: James Hartzler =
Sent: Friday, July 21, 2023 12:17 PM
To: Michael =
Reed <reed@rmrdevelopment.com>; =
Aaron Jones <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Cc: Jack Hartzler <jackhartzler@dpksi.com>
=
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Fri 07/28 @ 1:00pm EST / =
12:00pm CST.
See below for updates =
from 07/21 meeting.
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update 07/21 – We need =
to use transaction reports to review the accuracy of our inventory =
counts. Mike and =
Aaron to review inventory system daily and to aid in the implementation =
and accuracy of our recipes and data entry. On site visit may be =
required.Aaron to =
modify the woodshop usage entry screen to include shipping number from =
billing so we can accurately track time, material, and quantity of units =
made reported with quantity of units billed – what they make =
should always match what we say we billed – just ask each week if =
everything tied or if there were any =
discrepancies.Mike =
& Aaron to add a work in process bucket to woodshop that will move =
the amount of lumber needed per the a-card’s recipe out of =
inventory and in to a work in process bucket. Once the a-card is =
completed the lumber used would be removed from the work in process =
bucket and not from inventory.Fernando, Mike, and Aaron will work on a process where Fernando =
and team report daily what they check out of the inventory in whole =
pieces. We will use this data to help us validate recipes and scrap =
rates.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate 07/21 – Mike and =
Aaron to think through how we can see who is idle in real time and which =
a-cards are active and who is currently assigned to =
them.Now =
getting report from Swipejobs each morning of who is at work so we can =
report that to the RMR system and in return the RMR system can tell us =
who is not actively on an a-cardMike to =
highlight anyone that is on an a-card but is missing a clock in =
transaction so we can either remove them from the a-card or go ahead and =
manually process a clock in transaction for them – Mike to release =
that today
Start =
using system to review direct labor costs for parts – using the =
system to help us quote the business.Incentive system
Thanks,
James
From: James Hartzler =
Sent: Friday, July 7, 2023 1:01 PM
To: Michael Reed =
<reed@rmrdevelopment.com>; =
Aaron Jones <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Cc: Jack Hartzler <jackhartzler@dpksi.com>
=
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Fri 07/14 @ 11:00am EST / =
10:00am CST.
See below for updates =
from 07/07 meeting.
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update 07/07 – We need =
to use transaction reports to review the accuracy of our inventory =
counts. Mike and =
Aaron to review inventory system daily and to aid in the implementation =
and accuracy of our recipes and data entry. On site visit may be =
required.Aaron to =
modify the woodshop usage entry screen to include shipping number from =
billing so we can accurately track time, material, and quantity of units =
made reported with quantity of units billed – what they make =
should always match what we say we billed – just ask each week if =
everything tied or if there were any =
discrepancies.Mike =
& Aaron to add a work in process bucket to woodshop that will move =
the amount of lumber needed per the a-card’s recipe out of =
inventory and in to a work in process bucket. Once the a-card is =
completed the lumber used would be removed from the work in process =
bucket and not from inventory.Fernando, Mike, and Aaron will work on a process where Fernando =
and team report daily what they check out of the inventory in whole =
pieces. We will use this data to help us validate recipes and scrap =
rates.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate 07/07 – Mike and =
Aaron to think through how we can see who is idle in real time and which =
a-cards are active and who is currently assigned to =
them.Now =
getting report from Swipejobs each morning of who is at work so we can =
report that to the RMR system and in return the RMR system can tell us =
who is not actively on an a-cardMike to =
highlight anyone that is on an a-card but is missing a clock in =
transaction so we can either remove them from the a-card or go ahead and =
manually process a clock in transaction for themAaron to =
setup a process where the list of employees is compared to the list of =
employees from the daily Swipejobs report and a cleanup is done to the =
RMR system to match the Swipejobs employee names and ID =
numbers
Start =
using system to review direct labor costs for parts – using the =
system to help us quote the business.
Thanks,
James
From: James Hartzler =
Sent: Friday, June 23, 2023 11:53 AM
To: Michael =
Reed <reed@rmrdevelopment.com>; =
Aaron Jones <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Cc: Jack Hartzler <jackhartzler@dpksi.com>
=
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Fri 06/30 @ 11:00am EST / =
10:00am CST.
See below for updates =
from 06/23 meeting.
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update 06/23 – We need =
to use transaction reports to review the accuracy of our inventory =
counts. Mike and =
Aaron to review inventory system daily and to aid in the implementation =
and accuracy of our recipes and data entry. On site visit may be =
required.Aaron to =
modify the woodshop usage entry screen to include shipping number from =
billing so we can accurately track time, material, and quantity of units =
made reported with quantity of units billed – what they make =
should always match what we say we billed.Mike =
will default the container quantity in woodshop so we can help eliminate =
the issue where they enter the container quantity wrong – Mike has =
this completed but it still needs to be =
released.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate 06/23 – Mike and =
Aaron to think through how we can see who is idle in real time and which =
a-cards are active and who is currently assigned to =
them.
Start =
using system to review direct labor costs for parts – using the =
system to help us quote the business.
Thanks,
James
From: James Hartzler =
Sent: Thursday, June 15, 2023 12:19 PM
To: ‘Michael =
Reed’ <reed@rmrdevelopment.com>; =
‘Aaron Jones’ <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Cc: Jack Hartzler <jackhartzler@dpksi.com>
=
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Fri 06/23 @ 11:00am EST / =
10:00am CST.
See below for updates =
from 06/15 meeting.
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update 06/15 – We need =
to use transaction reports to review the accuracy of our inventory =
counts. Mike and =
Aaron to review inventory system daily and to aid in the implementation =
and accuracy of our recipes and data entry. On site visit may be =
required.Aaron to =
modify the woodshop usage entry screen to include shipping number from =
billing so we can accurately track time, material, and quantity of units =
made reported with quantity of units billed – what they make =
should always match what we say we billed.Mike =
will default the container quantity in woodshop so we can help eliminate =
the issue where they enter the container quantity =
wrong.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate 06/15 – Aaron to =
work on getting an automated report for labor entry sent to Fernando =
each day for the previous day. Maybe getting it at noon CST / 1pm EST =
each day so Jennifer and Tiffany have time in the morning to get the =
labor sheets entered for the previous day making the report more =
accurate.Mike and =
Aaron to think through how we can see who is idle in real time and which =
a-cards are active and who is currently assigned to =
them.
Start =
using system to review direct labor costs for parts – using the =
system to help us quote the business.
Thanks,
James
From: James Hartzler =
Sent: Thursday, June 8, 2023 12:25 PM
To: ‘Michael =
Reed’ <reed@rmrdevelopment.com>; =
‘Aaron Jones’ <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Cc: Jack Hartzler <jackhartzler@dpksi.com>
=
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Fri 06/16 @ 11:00am EST / =
10:00am CST.
See below for updates =
from 06/08 meeting.
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update 06/08 – We need =
to use transaction reports to review the accuracy of our inventory =
counts. Mike and =
Aaron to review inventory system daily and to aid in the implementation =
and accuracy of our recipes and data entry. On site visit may be =
required.Aaron =
and Mike to review the way we input physical inventory counts VS =
deliveries. We need to make sure we are not entering deliveries as =
physical inventories and vice versa.Mike =
will input a date field on deliveries so we can input manually the date =
the delivery takes place. This will allow us to enter a receipt on =
Tuesday but assign it Monday’s date if that is the actual day it =
was received.Aaron =
will make sure that all deliveries appear as the first transaction on =
the date they are received and that all physicals are the last =
transaction on the date they are entered.Aaron to =
modify the woodshop usage entry screen to include shipping number from =
billing so we can accurately track time, material, and quantity of units =
made reported with quantity of units billed – what they make =
should always match what we say we billed.Mike =
will default the container quantity in woodshop so we can help eliminate =
the issue where they enter the container quantity =
wrong.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate 06/08 – Aaron to =
think about how we can review the labor report, go research and find out =
what the employee was actually working on, and then be able to go in and =
edit their time for the day to manually tell the system what a-cards =
they were working or add them to the indirect list if =
neededAaron to =
work on getting an automated report for labor entry sent to Fernando =
each day for the previous day. Maybe getting it at noon CST / 1pm EST =
each day so Jennifer and Tiffany have time in the morning to get the =
labor sheets entered for the previous day making the report more =
accurate.Aaron to =
sort the report so that the data is reported from highest idle time to =
least idle time
Start =
using system to review direct labor costs for parts – using the =
system to help us quote the business.
Thanks,
James
From: James Hartzler =
Sent: Thursday, May 25, 2023 12:00 PM
To: Michael =
Reed <reed@rmrdevelopment.com>; =
Aaron Jones <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Cc: Jack Hartzler <jackhartzler@dpksi.com>
=
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Fri 06/08 @ 11:00am EST / =
10:00am CST.
See below for updates =
from 05/25 meeting.
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update 05/25 – We need =
to use transaction reports to review the accuracy of our inventory =
counts. Mike and =
Aaron to review inventory system daily and to aid in the implementation =
and accuracy of our recipes and data entry. On site visit may be =
required.Aaron to =
modify the woodshop usage entry screen to include shipping number from =
billing so we can accurately track time, material, and quantity of units =
made reported with quantity of units billed – what they make =
should always match what we say we =
billed.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate 05/25 – Aaron to =
think about how we can review the labor report, go research and find out =
what the employee was actually working on, and then be able to go in and =
edit their time for the day to manually tell the system what a-cards =
they were working or add them to the indirect list if =
needed.Aaron to =
work on getting an automated report for labor entry sent to Fernando =
each day for the previous day. Maybe getting it at noon CST / 1pm EST =
each day so Jennifer and Tiffany have time in the morning to get the =
labor sheets entered for the previous day making the report more =
accurate.Aaron to =
review how the report calculates time and make sure that anything that =
is 7 hours and 60 minutes is reported as 8 =
hours.
Start =
using system to review direct labor costs for parts – using the =
system to help us quote the business.
Thanks,
James
From: James Hartzler =
Sent: Friday, May 19, 2023 11:57 AM
To: Michael =
Reed <reed@rmrdevelopment.com>; =
Aaron Jones <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Cc: Jack Hartzler <jackhartzler@dpksi.com>
=
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Thurs 05/25 @ 11:00am EST / =
10:00am CST.
See below for updates =
from 05/19 meeting.
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update 05/19 – We need =
to use transaction reports to review the accuracy of our inventory =
counts. Mike and =
Aaron to review inventory system daily and to aid in the implementation =
and accuracy of our recipes and data entry. On site visit may be =
required.Aaron to =
modify the reports so that the unit of measure abbreviation is beside =
each transaction.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate 05/19 – Aaron to =
make a report so that we can search by date and see who was listed as =
indirect and then see how much of their time was indirect, direct, and =
then total for the shift – This is =
a work in process Will =
have two reports one for just indirect and one that shows =
everyoneMike and =
Aaron to confirm that the app and reports are using central time zone =
– work in processAaron to =
make sure we can choose, direct, indirect, and all so we can see all =
three categories in separate reports as neededAaron to =
think about how we can review the labor report, go research and find out =
what the employee was actually working on, and then be able to go in and =
edit their time for the day to manually tell the system what a-cards =
they were working or add them to the indirect list if =
needed.Aaron to =
work on getting an automated report for labor entry sent to Fernando =
each day for the previous day. Maybe getting it at noon CST / 1pm EST =
each day so Jennifer and Tiffany have time in the morning to get the =
labor sheets entered for the previous day making the report more =
accurate.
Start =
using system to review direct labor costs for parts – using the =
system to help us quote the business.
Thanks,
James
From: James Hartzler =
Sent: Friday, May 5, 2023 11:57 AM
To: ‘Michael =
Reed’ <reed@rmrdevelopment.com>; =
‘Aaron Jones’ <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Cc: Jack Hartzler <jackhartzler@dpksi.com>
=
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Fri 05/19 @ 11:00am EST / =
10:00am CST.
See below for updates =
from 05/05 meeting.
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update 05/05 – We need =
to use transaction reports to review the accuracy of our inventory =
counts. Aaron / =
Mike to create something on the website so we can manually enter =
material usage (lumber) when we were unable to enter it on the tablets =
for whatever reason – Fernando to instruct the team that they need =
to report the wood they use on the white paper if they are unable to sue =
the tablets.Mike and =
Aaron to review how we can allow Jennifer to write off the inches of =
lumber consumed on the TOPS a-card that she manually generates each week =
– Mike to release new version that allows this and will train =
Jennifer accordingly.Mike to =
make entry available in the billing system for Jennifer so she can enter =
this on the web and on the tablet if =
needed
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate 05/05 – Mike to =
work on adding in a generic a-card for indirect =
employeesIt is =
available for us to use:Aaron to =
add a designator to all 41 people on the list that Jennifer provided =
notating them as indirect and defaulting them to everyday and then =
Jennifer will review the list each day, remove anyone that was absent or =
quit, add anyone that needs added, and adjust manually the time for =
anyone that worked OT that dayAaron to =
make a report so that we can search by date and see who was listed as =
indirect and then see how much of their time was indirect, direct, and =
then total for the shift – This is =
a work in process Will =
have two reports one for just indirect and one that shows =
everyoneMike and =
Aaron to confirm that the app and reports are using central time zone =
– work in process
Billing =
system update to be completed on Monday 05/08
Thanks,
James
From: James Hartzler =
Sent: Friday, April 28, 2023 12:45 PM
To: ‘Michael =
Reed’ <reed@rmrdevelopment.com>; =
‘Aaron Jones’ <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Cc: Jack Hartzler <jackhartzler@dpksi.com>
=
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Fri 05/05 @ 11:00am EST / =
10:00am CST.
See below for updates =
from 04/28 meeting.
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update 04/28 – We need =
to use transaction reports to review the accuracy of our inventory =
counts. Jennifer =
to train someone else on how to enter inventory using the tablets and =
get the inventory report so that if she is not at work we can keep =
entering inventory counts and submitting the report to the =
team.Mike and =
Aaron to review how we can allow Jennifer to write off the inches of =
lumber consumed on the TOPS a-card that she manually generates each week =
– Mike to release new version that allows this and will train =
Jennifer accordingly.Fernando =
and Jennifer to make sure we are reporting and calculating how much we =
use for each TOP so we can accurately tell the system how many inches of =
the 1x4x10 lumber we use – Fernando to meet with teammates and ask =
them to start recording what they used for =
lumberFernando =
will meet with Fidel and make sure he know to count carefully each week =
to avoid mistakes. We will also ask that there is a second count done =
separately and that the counts between Fidel and the other person match =
before they turn them in to Jennifer for submission in the =
system.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate 04/28 – Mike to =
work on adding in a generic a-card for indirect employees – It is =
available for us to use but Jennifer and Mike need to train on that =
process so we can start using it daily.Someone =
will need to go in daily and add, remove, and approve the indirect list =
for each day. The system will automatically give them the entire shift 6 =
to 2:30 and then Mike will give us an option to manually edit the team =
members in that group to add or remove hours so that those couple of =
people that work over each day we can plus up their hours to match what =
they actually worked.We need =
to monitor and review – Aaron to make a report so that we can =
search by date and see who was listed as indirect and then see how much =
of their time was indirect, direct, and then total for the shift – =
this is a work in processAaron to =
add a queue on the web so that we can see all the indirect days that =
still need to be audited and given final approval so we do not miss any =
final approvals – work in processAaron to =
work on making negative time an impossibility – we should not be =
able to choose a date and time to end an a-card that is prior to the =
a-card start timeMike and =
Aaron to confirm that the app and reports are using central time =
zone
Thanks,
James
From: James Hartzler =
Sent: Friday, April 21, 2023 1:51 PM
To: ‘Michael =
Reed’ <reed@rmrdevelopment.com>; =
‘Aaron Jones’ <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Cc: Jack Hartzler <jackhartzler@dpksi.com>
=
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Fri 04/28 @ 11:00am EST / =
10:00am CST.
See below for updates =
from 04/21 meeting.
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update 04/21 – We need =
to use transaction reports to review the accuracy of our inventory =
counts. Jennifer =
to train someone else on how to enter inventory using the tablets and =
get the inventory report so that if she is not at work we can keep =
entering inventory counts and submitting the report to the =
team.Aaron =
will add the box and recipe to the Inventory detail by date and part =
report so we can further analyze if there are any issues with the =
recipeMike and =
Aaron to review how we can allow Jennifer to write off the inches of =
lumber consumed on the TOPS a-card that she manually generates each =
week.Fernando =
and Jennifer to make sure we are reporting and calculating how much we =
use for each TOP so we can accurately tell the system how many inches of =
the 1x4x10 lumber we useFernando =
to identify any other times we are using lumber that is not being used =
in woodshop so we can track that usage manually and reduce the inventory =
in our systemWe will =
review that inventory every week as they count every week to make sure =
everything makes sense and ties outFernando =
will meet with Fidel and make sure he know to count carefully each week =
to avoid mistakes. We will also ask that there is a second count done =
separately and that the counts between Fidel and the other person match =
before they turn them in to Jennifer for submission in the =
system.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate 04/21 – Mike to =
work on adding in a generic a-card for indirect employees. =
Someone =
will need to go in daily and add, remove, and approve the indirect list =
for each day. The system will automatically give them the entire shift 6 =
to 2:30 and then Mike will give us an option to manually edit the team =
members in that group to add or remove hours so that those couple of =
people that work over each day we can plus up their hours to match what =
they actually worked.Mike =
trained Jennifer on this process 4/13We need =
to monitor and review – Aaron to make a report so that we can =
search by date and see who was listed as indirect and then see how much =
of their time was indirect, direct, and then total for the =
shift.Aaron to =
add a queue on the web so that we can see all the indirect days that =
still need to be audited and given final approval so we do not miss any =
final approvals.We need =
to be able to calculate indirect labor in two =
scenarios:In =
process (they need to begin entering indirect people daily for this to =
work) – If they =
are not assigned any direct labor hours on an a-card then all 8 hours =
that shift will be assigned to indirect labor if they are assigned to =
the indirect labor a-card for that dayIf they =
have been assigned direct labor time then the system will calculate that =
their indirect labor will be 8 hours minus any direct labor time they =
were assigned
Thanks,
James
From: James Hartzler =
Sent: Friday, April 14, 2023 1:29 PM
To: ‘Michael =
Reed’ <reed@rmrdevelopment.com>; =
‘Aaron Jones’ <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Fri 04/21 @ 11:00am EST / =
10:00am CST.
See below for updates =
from 04/14 meeting.
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update =
04/14 – Jennifer =
to monitor and update us next week if it is working or needs additional =
refinement. We need =
to use transaction reports to review the accuracy of our inventory =
counts. Jennifer =
said she would start entering receipts on the tablets after the March =
inventory is input – need to validate this is =
happening.Aaron =
will add the box and recipe to the Inventory detail by date and part =
report so we can further analyze if there are any issues with the =
recipeWe will =
review that inventory every week as they count every week to make sure =
everything makes sense and ties outFernando =
will meet with Fidel and make sure he know to count carefully each week =
to avoid mistakes. We will also ask that there is a second count done =
separately and that the counts between Fidel and the other person match =
before they turn them in to Jennifer for submission in the =
system.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate 04/14 – Mike to =
work on adding in a generic a-card for indirect employees. =
Someone =
will need to go in daily and add, remove, and approve the indirect list =
for each day. The system will automatically give them the entire shift 6 =
to 2:30 and then Mike will give us an option to manually edit the team =
members in that group to add or remove hours so that those couple of =
people that work over each day we can plus up their hours to match what =
they actually worked.Mike =
trained Jennifer on this process 4/13We need =
to monitor and review – Aaron to make a report so that we can =
search by date and see who was listed as indirect and then see how much =
of their time was indirect, direct, and then total for the =
shift.Aaron to =
add a queue on the web so that we can see all the indirect days that =
still need to be audited and given final approval so we do not miss any =
final approvals.We need =
to be able to calculate indirect labor in two =
scenarios:In =
process (they need to begin entering indirect people daily for this to =
work) – If they =
are not assigned any direct labor hours on an a-card then all 8 hours =
that shift will be assigned to indirect labor if they are assigned to =
the indirect labor a-card for that dayIf they =
have been assigned direct labor time then the system will calculate that =
their indirect labor will be 8 hours minus any direct labor time they =
were assignedOrdering =
new HardwareUpdate 04/14 – Mike to order 2 new tablets – =
after speaking with Jennifer they determined only 2 were needed and not =
4 and that still allows each allocate person to have their own =
tablet.
Thanks,
James
From: James Hartzler =
Sent: Thursday, April 6, 2023 2:27 PM
To: ‘Michael =
Reed’ <reed@rmrdevelopment.com>; =
‘Aaron Jones’ <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Thursday 04/14 @ 11:00am =
EST / 10:00am CST.
See below for updates =
from 04/06 meeting.
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update =
03/03 – Mike has one more minor change he needs to make to the app =
and then he will be able to push the new version to the tablets so we =
can begin using that. He feels that Jennifer will be able to handle =
talking to the end users to make sure that they are using the app =
properly to record materials when they are working on an =
a-card.Update =
03/10 – Mike did not complete the app update yet. He has about an =
hour more work to do on it and then should be able to release the new =
version. Mike to get with Jennifer and inform her how to record material =
usage.Update =
03/24 – Mike has published the update and team members are using =
the new release. Jennifer to monitor and update us next week if it is =
working or needs additional refinement. We need Aaron to make reports =
for us so we can see validate our inventory transactions as needed. We =
will review the edit to inventory that will be performed each time we do =
a physical count.Update =
03/31 – Jennifer to monitor and update us next week if it is working or =
needs additional refinement. Aaron has developed a transaction report =
that allows us to see by part what was used by date and a-card – =
we need to use that to review the accuracy of our inventory counts. =
Jennifer said she would start entering receipts on the tablets after the =
March inventory is input.Update =
04/06 – Jennifer to monitor and update us next week if it is working or =
needs additional refinement. We need to use transaction reports to =
review the accuracy of our inventory counts. Jennifer said she would =
start entering receipts on the tablets after the March inventory is =
input – need to validate this is =
happening.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate 3/24 – Aaron to add a report that =
allows us to see by a given date all the a-cards that have a time study =
and when we drill down on the a-card we see all the people that worked =
on that a-card for auditing purposes – done Mike to work on adding in a generic =
a-card for indirect employees. Someone will need to go in daily and add, =
remove, and approve the indirect list for each day. The system will =
automatically give them the entire shift 6 to 2:30 and then Mike will =
give us an option to manually edit the team members in that group to add =
or remove hours so that those couple of people that work over each day =
we can plus up their hours to match what they actually worked. – =
in process Add in the quantity of parts =
processed on the valid a-cards in the billing section so we can see how =
many parts the average is coming from – done We need to modify the API to deduct =
break times in addition to lunch time. An employee actually only has 7 =
hours and 35 minutes where they can be working. They are paid for 8 =
hours which includes 25 minutes of break and are at the facility for 8.5 =
hours because the lunch is unpaid. Listed below are the breaks and =
lunches we need to code for and assign the various work centers to those =
lunches and breaks accordingly: – Done =
Mike will make it so no one can start or stop a time study during =
a break or lunch period that is assigned to that work =
center.
Update 3/31 – Mike to work on adding in a =
generic a-card for indirect employees. Someone will need to go in daily =
and add, remove, and approve the indirect list for each day. The system =
will automatically give them the entire shift 6 to 2:30 and then Mike =
will give us an option to manually edit the team members in that group =
to add or remove hours so that those couple of people that work over =
each day we can plus up their hours to match what they actually worked. =
– Mike will make it so no one can start or stop a time study during a =
break or lunch period that is assigned to that work =
center.
Update 04/06 – Mike to =
work on adding in a generic a-card for indirect employees. Someone will =
need to go in daily and add, remove, and approve the indirect list for =
each day. The system will automatically give them the entire shift 6 to =
2:30 and then Mike will give us an option to manually edit the team =
members in that group to add or remove hours so that those couple of =
people that work over each day we can plus up their hours to match what =
they actually worked.Mike =
will make it so no one can start or stop a time study during a break or =
lunch period that is assigned to that work center – needs to be =
released and updated on tablets and will be in place prior to the next =
meeting.Aaron to =
work on making it harder for Tiffany to manually key in time that does =
not make sense – we had an employee that it looked like they =
worked 21 hours on 4/4We need =
to be able to calculate indirect labor in two =
scenarios:If they =
are not assigned any direct labor hours on an a-card then all 8 hours =
that shift will be assigned to indirect labor if they are assigned to =
the indirect labor a-card for that dayIf they =
have been assigned direct labor time then the system will calculate that =
their indirect labor will be 8 hours minus any direct labor time they =
were assignedMike to =
order 4 new tablets so each allocate person has their own =
tablet.
Thanks,
James
From: James Hartzler =
Sent: Friday, March 31, 2023 5:11 PM
To: ‘Michael =
Reed’ <reed@rmrdevelopment.com>; =
‘Aaron Jones’ <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Thursday 04/06 @ 12:00pm =
EST / 11:00am CST.
See below for updates =
from 03/24 meeting.
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update =
03/03 – Mike has one more minor change he needs to make to the app =
and then he will be able to push the new version to the tablets so we =
can begin using that. He feels that Jennifer will be able to handle =
talking to the end users to make sure that they are using the app =
properly to record materials when they are working on an =
a-card.Update =
03/10 – Mike did not complete the app update yet. He has about an =
hour more work to do on it and then should be able to release the new =
version. Mike to get with Jennifer and inform her how to record material =
usage.Update =
3/24 – Mike has published the update and team members are using =
the new release. Jennifer to monitor and update us next week if it is =
working or needs additional refinement. We need Aaron to make reports =
for us so we can see validate our inventory transactions as needed. We =
will review the edit to inventory that will be performed each time we do =
a physical count.Update =
3/31 – Jennifer to monitor and update us next week if it is working or =
needs additional refinement. Aaron has developed a transaction report =
that allows us to see by part what was used by date and a-card – =
we need to use that to review the accuracy of our inventory counts. =
Jennifer said she would start entering receipts on the tablets after the =
March inventory is input.
Time =
study offline availability – completedUpdate =
03/03 – Mike has published this update and it should be available =
on all devices. Need to confirm with Jennifer that all tablets have the =
new version.Update =
03/10 – Mike will continue to review prior to us closing this line =
item.Update =
3/24 – Mike made some minor adjustments and wants to continue to =
evaluate those changes.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate 3/24 – Aaron to add a report that =
allows us to see by a given date all the a-cards that have a time study =
and when we drill down on the a-card we see all the people that worked =
on that a-card for auditing purposes – done Mike to work on adding in a generic =
a-card for indirect employees. Someone will need to go in daily and add, =
remove, and approve the indirect list for each day. The system will =
automatically give them the entire shift 6 to 2:30 and then Mike will =
give us an option to manually edit the team members in that group to add =
or remove hours so that those couple of people that work over each day =
we can plus up their hours to match what they actually worked. – =
in process Add in the quantity of parts =
processed on the valid a-cards in the billing section so we can see how =
many parts the average is coming from – done We need to modify the API to deduct =
break times in addition to lunch time. An employee actually only has 7 =
hours and 35 minutes where they can be working. They are paid for 8 =
hours which includes 25 minutes of break and are at the facility for 8.5 =
hours because the lunch is unpaid. Listed below are the breaks and =
lunches we need to code for and assign the various work centers to those =
lunches and breaks accordingly: – Done =
Mike will make it so no one can start or stop a time study during =
a break or lunch period that is assigned to that work =
center.Update 3/31 – Mike to =
work on adding in a generic a-card for indirect employees. Someone will =
need to go in daily and add, remove, and approve the indirect list for =
each day. The system will automatically give them the entire shift 6 to =
2:30 and then Mike will give us an option to manually edit the team =
members in that group to add or remove hours so that those couple of =
people that work over each day we can plus up their hours to match what =
they actually worked.Mike =
will make it so no one can start or stop a time study during a break or =
lunch period that is assigned to that work =
center.
Thanks,
James
From: James Hartzler =
Sent: Friday, March 24, 2023 11:59 AM
To: ‘Michael =
Reed’ <reed@rmrdevelopment.com>; =
‘Aaron Jones’ <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Friday 03/31 @ 12:00pm EST =
/ 11:00am CST.
See below for updates =
from 03/24 meeting.
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update =
03/03 – Mike has one more minor change he needs to make to the app =
and then he will be able to push the new version to the tablets so we =
can begin using that. He feels that Jennifer will be able to handle =
talking to the end users to make sure that they are using the app =
properly to record materials when they are working on an =
a-card.Update =
03/10 – Mike did not complete the app update yet. He has about an =
hour more work to do on it and then should be able to release the new =
version. Mike to get with Jennifer and inform her how to record material =
usage.Update =
3/24 – Mike has published the update and team members are using =
the new release. Jennifer to monitor and update us next week if it is =
working or needs additional refinement. We need Aaron to make reports =
for us so we can see validate our inventory transactions as needed. We =
will review the edit to inventory that will be performed each time we do =
a physical count.
Time =
study offline availabilityUpdate =
03/03 – Mike has published this update and it should be available =
on all devices. Need to confirm with Jennifer that all tablets have the =
new version.Update =
03/10 – Mike will continue to review prior to us closing this line =
item.Update =
3/24 – Mike made some minor adjustments and wants to continue to =
evaluate those changes.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate =
03/03 – We need to find a way to list the people that are working =
when the manual time sheet is being used instead of the tablet to record =
the time study. This should include employe first and last name and the =
start and finish time for the a-card. Then we need to add a picker to =
the Daily Summary of Labor so that we can enter in to the system who was =
working on the manual time sheets. We need to add the start and end time =
on the manual sheets as well. Aaron needs to do some coding to make this =
happen in the system – will update us on when this is ready to go =
so we can have Tiffany and Jennifer start entering time on manual sheets =
differently. Update =
03/10 – Aaron will add a button for Jennifer to kick off the =
stored procedure which updates what a-cards have a time study versus =
those that do not – done Add in =
the quantity of parts processed on the valid a-cards in the billing =
section so we can see how many parts the average is coming from. We need =
to modify the API to deduct break times in addition to lunch time. An =
employee actually only has 7 hours and 35 minutes where they can be =
working. They are paid for 8 hours which includes 25 minutes of break =
and are at the facility for 8.5 hours because the lunch is unpaid. =
Listed below are the breaks and lunches we need to code for and assign =
the various work centers to those lunches and breaks =
accordingly:Update =
3/24 – Aaron to =
add a report that allows us to see by a given date all the a-cards that =
have a time study and when we drill down on the a-card we see all the =
people that worked on that a-card for auditing =
purposesMike to =
work on adding in a generic a-card for indirect employees. Someone will =
need to go in daily and add, remove, and approve the indirect list for =
each day. The system will automatically give them the entire shift 6 to =
2:30 and then Mike will give us an option to manually edit the team =
members in that group to add or remove hours so that those couple of =
people that work over each day we can plus up their hours to match what =
they actually worked.Add in =
the quantity of parts processed on the valid a-cards in the billing =
section so we can see how many parts the average is coming =
fromWe need =
to modify the API to deduct break times in addition to lunch time. An =
employee actually only has 7 hours and 35 minutes where they can be =
working. They are paid for 8 hours which includes 25 minutes of break =
and are at the facility for 8.5 hours because the lunch is unpaid. =
Listed below are the breaks and lunches we need to code for and assign =
the various work centers to those lunches and breaks =
accordingly:
Break 1a 8:45 =
– 9:00
Repack =
(all)
Woodshop =
(all)
Work centers 1 =
through 9
Break 1b 9:30 =
– 9:45
Auto-baggers =
(all)
Work center =
10-29
Lunch (1a)11 =
– 11:30
Repack =
(all)
Woodshop =
(all)
Work centers 1 =
through 9
Lunch =
(1b)
Noon – =
12:30
Auto-baggers =
(all)
Work center =
10-29
Break =
2
1:00 – =
1:10
All work =
centers
Thanks,
James
From: James Hartzler =
Sent: Friday, March 10, 2023 9:10 AM
To: ‘Michael =
Reed’ <reed@rmrdevelopment.com>; =
‘Aaron Jones’ <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Friday 03/17 @ 11:00am EST =
/ 10:00am CST.
See below for updates =
from 03/10 meeting.
Screen =
scrape / Data import from excel reportMike is =
working on getting access to the remote Tolas sessions from our devices. =
Once he does he will work on screen scraping all the data on an a-card =
so we no longer have to have several people working to scan every a-card =
in to our systemUpdate =
01/26 – Still waiting to hear back from Bob. Aaron will follow up =
week of 01/30 to get another update.Update =
02/17 – Bob from Navistar did communicate that they are now giving =
us a repack report three times a day and that it hopefully has what we =
need. Jennifer and team will be using the new files today (02/17) and =
will report back if they work or not to reduce manually having to enter =
repack a-cardsUpdate =
02/24 – Bob replied and requested a-card examples that we had to =
manually scan. Jennifer will reply to him and provide the requested =
information so we can continue troubleshooting.Update =
03/03 – Aaron is under the impression that everything is working =
now for repack a-cards to be imported. However, we need to confirm that =
with the team onsite to make sure they are no longer scanning in repack =
a-cards manually.Update 03/10 =
– According to Jennifer we now no longer manually scan any a-card. =
All are imported. This task is =
complete.
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update =
01/26 – Mike and is ready to start training. Mike will update on =
how this goes.Update =
02/17 – All containers in woodshop (AKA international part =
numbers) need to have a matrix BOM. This BOM is the mix of items off of =
the bill matrix files that Jennifer uses to bill for those international =
parts. Then we need to assign the actual material used as a unique BOM =
and relate the various billing BOMS for a container to the various =
material consumed BOMS reported by the floor. Aaron is going to try and =
grab the billing BOMs used in the past for woodshop items and tie those =
to the international part so that we minimize the list of items that =
need to be manually entered by Jennifer for the billing =
BOM.Update =
02/24 – Aaron was able to match the billing matrix BOMS to the =
international part / container number for most woodshop items. We will =
have to manually do the rest as we process them in woodshop if we get =
them again. Mike and Aaron still need to test the upgraded process they =
have for identifying what materials are being used and associating them =
on the tablet to the international part. Once testing is complete and =
the system is updated we may need to do more end user training so they =
know how to do this.Update =
03/03 – Mike has one more minor change he needs to make to the app =
and then he will be able to push the new version to the tablets so we =
can begin using that. He feels that Jennifer will be able to handle =
talking to the end users to make sure that they are using the app =
properly to record materials when they are working on an =
a-card.Update =
03/10 – Mike did not complete the app update yet. He has about an =
hour more work to do on it and then should be able to release the new =
version. Mike to get with Jennifer and inform her how to record material =
usage.
Time =
study offline availabilityUpdate =
02/24 – Mike has made changes to the software so that time studies =
will keep running if the network is disconnected from the tablet until =
network connectivity can be restored. This will require a software =
update to the devices. Mike will hopefully finish and push the update in =
a few business days.Update =
03/03 – Mike has published this update and it should be available =
on all devices. Need to confirm with Jennifer that all tablets have the =
new version.Update =
03/10 – Mike will continue to review prior to us closing this line =
item.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate =
1/26 – Aaron has successfully merged the overage a-card QTY with =
the original a-card QTY. Still working on making sure the tablets store =
the data for time studies until network connectivity is restored (in the =
event the WIFI goes down) so we do not lose those time studies. Jennifer =
is checking every a-card when she bills it to make sure that it has a =
time study. There seems to be a disconnect though because she is seeing =
a time study for every a-card but the report doesn’t show that a =
time study exists on some limited records. Jennifer will review the =
process with Mike while he is onsite and make corrections as needed. We =
will also pull the report daily and then re-enter any white sheets that =
are showing as missing. Aaron =
will add in a log for labor reporting to see if an a-card labor record =
was ever uploaded or attempted to be uploaded.Update =
02/17 – Aaron has a log for labor now implemented to help us track =
why something is missing. Jennifer has requested that they modify and =
group by date so they know how many are done for a given day. Jennifer =
and Tiffany will review the report daily and try to get all time studies =
accounted for.Update =
02/24 – We found some issues where we have a time study but the =
system is not showing that we do. Aaron to review and provide an update =
on what he finds. Jennifer will continue to review and provide feedback =
to Aaron.We also =
discussed that we will add buttons to Jenny’s screen when she =
bills so that she can validate time studies.Additionally we discussed that the rate at which we produce a =
package needs to be calculated by taking total time on the clock divided =
by total units produced (60 minutes / 48 pieces =3D 1.25 minutes per =
unit).The =
amount of direct labor dollars needs to be calculated by taking people x =
time x labor billing rate (3 people X 1 hour X $19.50 per hour =3D =
$58.50 of direct labor cost for the order). In this example if we =
produced 48 units then our direct labor cost is $1.2187 per unit =
produced and our output is 1.25 units per minute using three =
people.Update =
03/03 – We need to find a way to list the people that are working =
when the manual time sheet is being used instead of the tablet to record =
the time study. This should include employe first and last name and the =
start and finish time for the a-card. Then we need to add a picker to =
the Daily Summary of Labor so that we can enter in to the system who was =
working on the manual time sheets. We need to add the start and end time =
on the manual sheets as well. Aaron needs to do some coding to make this =
happen in the system – will update us on when this is ready to go =
so we can have Tiffany and Jennifer start entering time on manual sheets =
differently. Update =
03/10 – Aaron =
will add a button for Jennifer to kick off the stored procedure which =
updates what a-cards have a time study versus those that do =
not.Add in =
the quantity of parts processed on the valid a-cards in the billing =
section so we can see how many parts the average is coming =
fromWe need =
to modify the API to deduct break times in addition to lunch time. An =
employee actually only has 7 hours and 35 minutes where they can be =
working. They are paid for 8 hours which includes 25 minutes of break =
and are at the facility for 8.5 hours because the lunch is unpaid. =
Listed below are the breaks and lunches we need to code for and assign =
the various work centers to those lunches and breaks =
accordingly:
Break 1a 8:45 =
– 9:00
Repack =
(all)
Woodshop =
(all)
Work centers 1 =
through 9
Break 1b 9:30 =
– 9:45
Auto-baggers =
(all)
Work center =
10-29
Lunch (1a)11 =
– 11:30
Repack =
(all)
Woodshop =
(all)
Work centers 1 =
through 9
Lunch =
(1b)
Noon – =
12:30
Auto-baggers =
(all)
Work center =
10-29
Break =
2
1:00 – =
1:10
All work =
centers
Thanks,
James
From: James Hartzler =
Sent: Friday, March 3, 2023 10:56 AM
To: ‘Michael =
Reed’ <reed@rmrdevelopment.com>; =
‘Aaron Jones’ <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Friday 03/10 @ 10:00am EST =
/ 9:00am CST.
See below for updates =
from 03/03 meeting.
Screen =
scrape / Data import from excel reportMike is =
working on getting access to the remote Tolas sessions from our devices. =
Once he does he will work on screen scraping all the data on an a-card =
so we no longer have to have several people working to scan every a-card =
in to our systemUpdate =
01/26 – Still waiting to hear back from Bob. Aaron will follow up =
week of 01/30 to get another update.Update =
02/17 – Bob from Navistar did communicate that they are now giving =
us a repack report three times a day and that it hopefully has what we =
need. Jennifer and team will be using the new files today (02/17) and =
will report back if they work or not to reduce manually having to enter =
repack a-cardsUpdate =
02/24 – Bob replied and requested a-card examples that we had to =
manually scan. Jennifer will reply to him and provide the requested =
information so we can continue troubleshooting.Update =
03/03 – Aaron is under the impression that everything is working =
now for repack a-cards to be imported. However, we need to confirm that =
with the team onsite to make sure they are no longer scanning in repack =
a-cards manually.
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update =
01/26 – Mike and is ready to start training. Mike will update on =
how this goes.Update =
02/17 – All containers in woodshop (AKA international part =
numbers) need to have a matrix BOM. This BOM is the mix of items off of =
the bill matrix files that Jennifer uses to bill for those international =
parts. Then we need to assign the actual material used as a unique BOM =
and relate the various billing BOMS for a container to the various =
material consumed BOMS reported by the floor. Aaron is going to try and =
grab the billing BOMs used in the past for woodshop items and tie those =
to the international part so that we minimize the list of items that =
need to be manually entered by Jennifer for the billing =
BOM.Update =
02/24 – Aaron was able to match the billing matrix BOMS to the =
international part / container number for most woodshop items. We will =
have to manually do the rest as we process them in woodshop if we get =
them again. Mike and Aaron still need to test the upgraded process they =
have for identifying what materials are being used and associating them =
on the tablet to the international part. Once testing is complete and =
the system is updated we may need to do more end user training so they =
know how to do this.Update =
03/03 – Mike has one more minor change he needs to make to the app =
and then he will be able to push the new version to the tablets so we =
can begin using that. He feels that Jennifer will be able to handle =
talking to the end users to make sure that they are using the app =
properly to record materials when they are working on an =
a-card.
Time =
study offline availabilityUpdate =
02/24 – Mike has made changes to the software so that time studies =
will keep running if the network is disconnected from the tablet until =
network connectivity can be restored. This will require a software =
update to the devices. Mike will hopefully finish and push the update in =
a few business days.Update =
03/03 – Mike has published this update and it should be available =
on all devices. Need to confirm with Jennifer that all tablets have the =
new version.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate =
1/26 – Aaron has successfully merged the overage a-card QTY with =
the original a-card QTY. Still working on making sure the tablets store =
the data for time studies until network connectivity is restored (in the =
event the WIFI goes down) so we do not lose those time studies. Jennifer =
is checking every a-card when she bills it to make sure that it has a =
time study. There seems to be a disconnect though because she is seeing =
a time study for every a-card but the report doesn’t show that a =
time study exists on some limited records. Jennifer will review the =
process with Mike while he is onsite and make corrections as needed. We =
will also pull the report daily and then re-enter any white sheets that =
are showing as missing. Aaron =
will add in a log for labor reporting to see if an a-card labor record =
was ever uploaded or attempted to be uploaded.Update =
02/17 – Aaron has a log for labor now implemented to help us track =
why something is missing. Jennifer has requested that they modify and =
group by date so they know how many are done for a given day. Jennifer =
and Tiffany will review the report daily and try to get all time studies =
accounted for.Update =
02/24 – We found some issues where we have a time study but the =
system is not showing that we do. Aaron to review and provide an update =
on what he finds. Jennifer will continue to review and provide feedback =
to Aaron.We also =
discussed that we will add buttons to Jenny’s screen when she =
bills so that she can validate time studies.Additionally we discussed that the rate at which we produce a =
package needs to be calculated by taking total time on the clock divided =
by total units produced (60 minutes / 48 pieces =3D 1.25 minutes per =
unit).The =
amount of direct labor dollars needs to be calculated by taking people x =
time x labor billing rate (3 people X 1 hour X $19.50 per hour =3D =
$58.50 of direct labor cost for the order). In this example if we =
produced 48 units then our direct labor cost is $1.2187 per unit =
produced and our output is 1.25 units per minute using three =
people.Update =
03/03 – We need to find a way to list the people that are working =
when the manual time sheet is being used instead of the tablet to record =
the time study. This should include employe first and last name and the =
start and finish time for the a-card. Then we need to add a picker to =
the Daily Summary of Labor so that we can enter in to the system who was =
working on the manual time sheets. We need to add the start and end time =
on the manual sheets as well. Aaron needs to do some coding to make this =
happen in the system – will update us on when this is ready to go =
so we can have Tiffany and Jennifer start entering time on manual sheets =
differently.
Thanks,
James
From: James Hartzler =
Sent: Friday, February 24, 2023 11:28 AM
To: =
‘Michael Reed’ <reed@rmrdevelopment.com>; =
‘Aaron Jones’ <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Friday 03/03 @ 10:00am EST =
/ 9:00am CST.
See below for updates =
from 02/24 meeting.
Screen =
scrape / Data import from excel reportMike is =
working on getting access to the remote Tolas sessions from our devices. =
Once he does he will work on screen scraping all the data on an a-card =
so we no longer have to have several people working to scan every a-card =
in to our systemUpdate =
01/26 – Still waiting to hear back from Bob. Aaron will follow up =
week of 01/30 to get another update.Update =
02/17 – Bob from Navistar did communicate that they are now giving =
us a repack report three times a day and that it hopefully has what we =
need. Jennifer and team will be using the new files today (02/17) and =
will report back if they work or not to reduce manually having to enter =
repack a-cardsUpdate =
02/24 – Bob replied and requested a-card examples that we had to =
manually scan. Jennifer will reply to him and provide the requested =
information so we can continue =
troubleshooting.
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update =
01/26 – Mike and is ready to start training. Mike will update on =
how this goes.Update =
02/17 – All containers in woodshop (AKA international part =
numbers) need to have a matrix BOM. This BOM is the mix of items off of =
the bill matrix files that Jennifer uses to bill for those international =
parts. Then we need to assign the actual material used as a unique BOM =
and relate the various billing BOMS for a container to the various =
material consumed BOMS reported by the floor. Aaron is going to try and =
grab the billing BOMs used in the past for woodshop items and tie those =
to the international part so that we minimize the list of items that =
need to be manually entered by Jennifer for the billing =
BOM.Update =
02/24 – Aaron was able to match the billing matrix BOMS to the =
international part / container number for most woodshop items. We will =
have to manually do the rest as we process them in woodshop if we get =
them again. Mike and Aaron still need to test the upgraded process they =
have for identifying what materials are being used and associating them =
on the tablet to the international part. Once testing is complete and =
the system is updated we may need to do more end user training so they =
know how to do this.
Time =
study offline availabilityUpdate =
02/24 – Mike has made changes to the software so that time studies =
will keep running if the network is disconnected from the tablet until =
network connectivity can be restored. This will require a software =
update to the devices. Mike will hopefully finish and push the update in =
a few business days.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate =
1/26 – Aaron has successfully merged the overage a-card QTY with =
the original a-card QTY. Still working on making sure the tablets store =
the data for time studies until network connectivity is restored (in the =
event the WIFI goes down) so we do not lose those time studies. Jennifer =
is checking every a-card when she bills it to make sure that it has a =
time study. There seems to be a disconnect though because she is seeing =
a time study for every a-card but the report doesn’t show that a =
time study exists on some limited records. Jennifer will review the =
process with Mike while he is onsite and make corrections as needed. We =
will also pull the report daily and then re-enter any white sheets that =
are showing as missing. Aaron =
will add in a log for labor reporting to see if an a-card labor record =
was ever uploaded or attempted to be uploaded.Update =
02/17 – Aaron has a log for labor now implemented to help us track =
why something is missing. Jennifer has requested that they modify and =
group by date so they know how many are done for a given day. Jennifer =
and Tiffany will review the report daily and try to get all time studies =
accounted for.Update =
02/24 – We found some issues where we have a time study but the =
system is not showing that we do. Aaron to review and provide an update =
on what he finds. Jennifer will continue to review and provide feedback =
to Aaron.We also =
discussed that we will add buttons to Jenny’s screen when she =
bills so that she can validate time studies.Additionally we discussed that the rate at which we produce a =
package needs to be calculated by taking total time on the clock divided =
by total units produced (60 minutes / 48 pieces =3D 1.25 minutes per =
unit).The =
amount of direct labor dollars needs to be calculated by taking people x =
time x labor billing rate (3 people X 1 hour X $19.50 per hour =3D =
$58.50 of direct labor cost for the order). In this example if we =
produced 48 units then our direct labor cost is $1.2187 per unit =
produced and our output is 1.25 units per minute using three =
people.
Thanks,
James
From: James Hartzler =
Sent: Friday, February 17, 2023 11:09 AM
To: =
‘Michael Reed’ <reed@rmrdevelopment.com>; =
‘Aaron Jones’ <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Friday 02/24 @ 10:00am EST =
/ 9:00am CST.
See below for updates =
from 02/17 meeting.
Screen =
scrape / Data import from excel reportMike is =
working on getting access to the remote Tolas sessions from our devices. =
Once he does he will work on screen scraping all the data on an a-card =
so we no longer have to have several people working to scan every a-card =
in to our systemUpdate =
12/02 – Navistar has responded and we now import all a-cards =
repack or standard and do not have to scan them =
anymore.Update =
12/16 – Waiting to hear back from Bob on issues with Repack cards. =
Mike and or Aaron to continue reaching out to Bob until this is =
resolvedUpdate =
01/06 – Bob is reaching out to Tolas, waiting for their feedback =
before making any changes. Jennifer said the 2:00pm report is now empty =
and there is a new report that comes at 3:00pm and it has data and =
works. Aaron will reach out to Bob and let him know about the 2 and 3pm =
reports and how they are now different.Update =
01/12 – 2:00pm report now works. Bob is still waiting for Tolas =
support to respond but he was going to reach back out to them for an =
update, we still need more current repack records in the report. Repack =
is basically a day behind so we are still manually scanning =
repack.Update =
01/19 – Jennifer confirmed this is still an issue. Aaron will =
reach out to Bob and request an update.Update =
01/26 – Still waiting to hear back from Bob. Aaron will follow up =
week of 01/30 to get another update.Update =
02/17 – Bob from Navistar did communicate that they are now giving =
us a repack report three times a day and that it hopefully has what we =
need. Jennifer and team will be using the new files today (02/17) and =
will report back if they work or not to reduce manually having to enter =
repack a-cards
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update =
11/11 – Need to work on this after we get pricing =
updatedUpdate =
11/18 – Pending pricing upgrading to finalize. Aaron and Mike to =
review before we turn it on to make sure it works.Update =
12/01 – Everything is in place but we need to add a way to fix in =
the average cost by item every month. So that reports in the future are =
always giving us the cost of material based on that month’s =
average cost at that time.Update =
12/16 – In progress. Need to refine data capture of receipts, =
usage, scrap, inventory adjustments due to using lumber on non-woodshop =
processes, month end inventory entries. Need to pilot for accuracy and =
then roll out to floor. ETA to using this in production is the week of =
01/09Update =
01/06 – Mike added the adjustments from the tablet. Aaron added a =
way to enter dates manually so that it doesn’t just record the =
date that they are entering the receipt.International parts (which are the container numbers for woodshop) =
have a BOM that is comprised of matrix billing codes. Matrix billing =
codes have a BOM that is made up of the actual lumber pieces and =
dimensions they are using plus the labels, bands, corrugate =
etc.Update =
01/12 – James and RMR to review in person after the 01/12 team =
meeting.Update =
01/19 – Aaron has everything done, and Mike is working on the =
tablet interface. Should be completed by the end of Friday 1/20. Testing =
to commence on Monday and Tuesday 1/23 and 1/24. Mike to be onsite 1/25 =
to do in person training and implementation.Update =
01/26 – Mike and is ready to start training. Mike will update on =
how this goes.Update =
02/17 – All containers in woodshop (AKA international part =
numbers) need to have a matrix BOM. This BOM is the mix of items off of =
the bill matrix files that Jennifer uses to bill for those international =
parts. Then we need to assign the actual material used as a unique BOM =
and relate the various billing BOMS for a container to the various =
material consumed BOMS reported by the floor. Aaron is going to try and =
grab the billing BOMs used in the past for woodshop items and tie those =
to the international part so that we minimize the list of items that =
need to be manually entered by Jennifer for the billing =
BOM.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate =
10/07 – Aaron will work to modify or create a new report that =
gives us more detail on the a-cards that do not have time =
studiesUpdate =
10/13 – Mike will be onsite to determine the cause of the tablet =
issues that prevent us from being able to enter all of our time studies =
with them. Is this network or hardware related, or both? How do we fix =
this issue?Update =
10/24 – Time studies report – We seen improvement =
from week of 10/17 to week of 10/24 on the percent of a-cards that had a =
time study verses those that didn’t. Good Job!! Aaron sent the =
updated reports to Fernando so that he could have a meeting with his =
team to let them know we still has some room for improvement. =
Labor Efficiency Report – Mike to work on data entry =
fields so that it is a bit more error proof. Would like to see the =
system force that the first letter in both names is capitalized and that =
the first and last names have a space between them.Update =
11/18 – Still working to make sure we are using tablets or writing =
the report for all billed linesUpdate =
12/01 – Jennifer will start working with the team members to make =
sure that either we get an import paper or a time study on the tablet =
for every a-card.Update =
12/16 – Aaron will review the system process of recording time =
against an a-card to ensure that there are no issues that could result =
in an error where we though the time study was entered but the system =
does not show a time study for that a-card. Jennifer and Aaron to work =
back and forth until we see each day showing either a time study import =
or a time study from the tablet for every a-card =
record.Update =
1/6 – GREAT JOB!! We have had a day where we had 0 time studies =
missed. That means that everything was captured either by manual import =
or tablet time study. Now we need to focus on getting the manual time =
studies down to as low as possible.Update =
1/12 – Aaron will look at the report and verify that we are =
handling overage a-cards properly and that we are not getting false =
positive reports stating that a-cards are not getting a time study. =
After the fix that eliminated some of the time study errors. =
Aaron =
will go see if a process can be added to merge the quantity from the =
overage a-card to the original a-card so when we calculate the average =
rate per piece it takes in to consideration all parts =
processedUpdate =
1/19 – Aaron still working on getting the quantity from overage =
a-cars merged with original a-card so that the average time per piece is =
correct.We had =
an issue where we were not able to upload our time studies. Mike to look =
and see how we prevent that in the future or if we cannot prevent it if =
there is a way to recover from it and mitigate the loss of time studies =
in the futureUpdate =
1/26 – Aaron has successfully merged the overage a-card QTY with =
the original a-card QTY. Still working on making sure the tablets store =
the data for time studies until network connectivity is restored (in the =
event the WIFI goes down) so we do not lose those time studies. Jennifer =
is checking every a-card when she bills it to make sure that it has a =
time study. There seems to be a disconnect though because she is seeing =
a time study for every a-card but the report doesn’t show that a =
time study exists on some limited records. Jennifer will review the =
process with Mike while he is onsite and make corrections as needed. We =
will also pull the report daily and then re-enter any white sheets that =
are showing as missing. Aaron =
will add in a log for labor reporting to see if an a-card labor record =
was ever uploaded or attempted to be uploaded.Update =
02/17 – Aaron has a log for labor now implemented to help us track =
why something is missing. Jennifer has requested that they modify and =
group by date so they know how many are done for a given day. Jennifer =
and Tiffany will review the report daily and try to get all time studies =
accounted for.
Thanks,
James
From: James Hartzler =
Sent: Thursday, January 26, 2023 10:53 AM
To: =
‘Michael Reed’ <reed@rmrdevelopment.com>; =
‘Aaron Jones’ <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Friday 02/10 @ 10:00am EST =
/ 9:00am CST.
See below for updates =
from 01/26 meeting.
Screen =
scrape / Data import from excel reportMike is =
working on getting access to the remote Tolas sessions from our devices. =
Once he does he will work on screen scraping all the data on an a-card =
so we no longer have to have several people working to scan every a-card =
in to our systemUpdate =
12/02 – Navistar has responded and we now import all a-cards =
repack or standard and do not have to scan them =
anymore.Update =
12/16 – Waiting to hear back from Bob on issues with Repack cards. =
Mike and or Aaron to continue reaching out to Bob until this is =
resolvedUpdate =
01/06 – Bob is reaching out to Tolas, waiting for their feedback =
before making any changes. Jennifer said the 2:00pm report is now empty =
and there is a new report that comes at 3:00pm and it has data and =
works. Aaron will reach out to Bob and let him know about the 2 and 3pm =
reports and how they are now different.Update =
01/12 – 2:00pm report now works. Bob is still waiting for Tolas =
support to respond but he was going to reach back out to them for an =
update, we still need more current repack records in the report. Repack =
is basically a day behind so we are still manually scanning =
repack.Update =
01/19 – Jennifer confirmed this is still an issue. Aaron will =
reach out to Bob and request an update.Update =
01/26 – Still waiting to hear back from Bob. Aaron will follow up =
week of 01/30 to get another update.
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update =
11/11 – Need to work on this after we get pricing =
updatedUpdate =
11/18 – Pending pricing upgrading to finalize. Aaron and Mike to =
review before we turn it on to make sure it works.Update =
12/01 – Everything is in place but we need to add a way to fix in =
the average cost by item every month. So that reports in the future are =
always giving us the cost of material based on that month’s =
average cost at that time.Update =
12/16 – In progress. Need to refine data capture of receipts, =
usage, scrap, inventory adjustments due to using lumber on non-woodshop =
processes, month end inventory entries. Need to pilot for accuracy and =
then roll out to floor. ETA to using this in production is the week of =
01/09Update =
01/06 – Mike added the adjustments from the tablet. Aaron added a =
way to enter dates manually so that it doesn’t just record the =
date that they are entering the receipt.International parts (which are the container numbers for woodshop) =
have a BOM that is comprised of matrix billing codes. Matrix billing =
codes have a BOM that is made up of the actual lumber pieces and =
dimensions they are using plus the labels, bands, corrugate =
etc.Update =
01/12 – James and RMR to review in person after the 01/12 team =
meeting.Update =
01/19 – Aaron has everything done, and Mike is working on the =
tablet interface. Should be completed by the end of Friday 1/20. Testing =
to commence on Monday and Tuesday 1/23 and 1/24. Mike to be onsite 1/25 =
to do in person training and implementation.Update =
01/26 – Mike and is ready to start training. Mike will update on =
how this goes.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate =
10/07 – Aaron will work to modify or create a new report that =
gives us more detail on the a-cards that do not have time =
studiesUpdate =
10/13 – Mike will be onsite to determine the cause of the tablet =
issues that prevent us from being able to enter all of our time studies =
with them. Is this network or hardware related, or both? How do we fix =
this issue?Update =
10/24 – Time studies report – We seen improvement =
from week of 10/17 to week of 10/24 on the percent of a-cards that had a =
time study verses those that didn’t. Good Job!! Aaron sent the =
updated reports to Fernando so that he could have a meeting with his =
team to let them know we still has some room for improvement. =
Labor Efficiency Report – Mike to work on data entry =
fields so that it is a bit more error proof. Would like to see the =
system force that the first letter in both names is capitalized and that =
the first and last names have a space between them.Update =
11/18 – Still working to make sure we are using tablets or writing =
the report for all billed linesUpdate =
12/01 – Jennifer will start working with the team members to make =
sure that either we get an import paper or a time study on the tablet =
for every a-card.Update =
12/16 – Aaron will review the system process of recording time =
against an a-card to ensure that there are no issues that could result =
in an error where we though the time study was entered but the system =
does not show a time study for that a-card. Jennifer and Aaron to work =
back and forth until we see each day showing either a time study import =
or a time study from the tablet for every a-card =
record.Update =
1/6 – GREAT JOB!! We have had a day where we had 0 time studies =
missed. That means that everything was captured either by manual import =
or tablet time study. Now we need to focus on getting the manual time =
studies down to as low as possible.Update =
1/12 – Aaron will look at the report and verify that we are =
handling overage a-cards properly and that we are not getting false =
positive reports stating that a-cards are not getting a time study. =
After the fix that eliminated some of the time study errors. =
Aaron =
will go see if a process can be added to merge the quantity from the =
overage a-card to the original a-card so when we calculate the average =
rate per piece it takes in to consideration all parts =
processedUpdate =
1/19 – Aaron still working on getting the quantity from overage =
a-cars merged with original a-card so that the average time per piece is =
correct.We had =
an issue where we were not able to upload our time studies. Mike to look =
and see how we prevent that in the future or if we cannot prevent it if =
there is a way to recover from it and mitigate the loss of time studies =
in the futureUpdate =
1/26 – Aaron has successfully merged the overage a-card QTY with =
the original a-card QTY. Still working on making sure the tablets store =
the data for time studies until network connectivity is restored (in the =
event the WIFI goes down) so we do not lose those time studies. Jennifer =
is checking every a-card when she bills it to make sure that it has a =
time study. There seems to be a disconnect though because she is seeing =
a time study for every a-card but the report doesn’t show that a =
time study exists on some limited records. Jennifer will review the =
process with Mike while he is onsite and make corrections as needed. We =
will also pull the report daily and then re-enter any white sheets that =
are showing as missing. Aaron =
will add in a log for labor reporting to see if an a-card labor record =
was ever uploaded or attempted to be =
uploaded.
Thanks,
James
From: James Hartzler =
Sent: Thursday, January 19, 2023 10:22 AM
To: =
‘Michael Reed’ <reed@rmrdevelopment.com>; =
‘Aaron Jones’ <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Thursday 01/26 @ 10:00am =
EST / 9:00am CST.
See below for updates =
from 01/19 meeting.
Screen =
scrape / Data import from excel reportMike is =
working on getting access to the remote Tolas sessions from our devices. =
Once he does he will work on screen scraping all the data on an a-card =
so we no longer have to have several people working to scan every a-card =
in to our systemUpdate =
12/02 – Navistar has responded and we now import all a-cards =
repack or standard and do not have to scan them =
anymore.Update =
12/16 – Waiting to hear back from Bob on issues with Repack cards. =
Mike and or Aaron to continue reaching out to Bob until this is =
resolvedUpdate =
01/06 – Bob is reaching out to Tolas, waiting for their feedback =
before making any changes. Jennifer said the 2:00pm report is now empty =
and there is a new report that comes at 3:00pm and it has data and =
works. Aaron will reach out to Bob and let him know about the 2 and 3pm =
reports and how they are now different.Update =
01/12 – 2:00pm report now works. Bob is still waiting for Tolas =
support to respond but he was going to reach back out to them for an =
update, we still need more current repack records in the report. Repack =
is basically a day behind so we are still manually scanning =
repack.Update =
01/19 – Jennifer confirmed this is still an issue. Aaron will =
reach out to Bob and request an update.
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update =
11/11 – Need to work on this after we get pricing =
updatedUpdate =
11/18 – Pending pricing upgrading to finalize. Aaron and Mike to =
review before we turn it on to make sure it works.Update =
12/01 – Everything is in place but we need to add a way to fix in =
the average cost by item every month. So that reports in the future are =
always giving us the cost of material based on that month’s =
average cost at that time.Update =
12/16 – In progress. Need to refine data capture of receipts, =
usage, scrap, inventory adjustments due to using lumber on non-woodshop =
processes, month end inventory entries. Need to pilot for accuracy and =
then roll out to floor. ETA to using this in production is the week of =
01/09Update =
01/06 – Mike added the adjustments from the tablet. Aaron added a =
way to enter dates manually so that it doesn’t just record the =
date that they are entering the receipt.International parts (which are the container numbers for woodshop) =
have a BOM that is comprised of matrix billing codes. Matrix billing =
codes have a BOM that is made up of the actual lumber pieces and =
dimensions they are using plus the labels, bands, corrugate =
etc.Update =
01/12 – James and RMR to review in person after the 01/12 team =
meeting.Update =
01/19 – Aaron has everything done, and Mike is working on the =
tablet interface. Should be completed by the end of Friday 1/20. Testing =
to commence on Monday and Tuesday 1/23 and 1/24. Mike to be onsite 1/25 =
to do in person training and =
implementation.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate =
10/07 – Aaron will work to modify or create a new report that =
gives us more detail on the a-cards that do not have time =
studiesUpdate =
10/13 – Mike will be onsite to determine the cause of the tablet =
issues that prevent us from being able to enter all of our time studies =
with them. Is this network or hardware related, or both? How do we fix =
this issue?Update =
10/24 – Time studies report – We seen improvement =
from week of 10/17 to week of 10/24 on the percent of a-cards that had a =
time study verses those that didn’t. Good Job!! Aaron sent the =
updated reports to Fernando so that he could have a meeting with his =
team to let them know we still has some room for improvement. =
Labor Efficiency Report – Mike to work on data entry =
fields so that it is a bit more error proof. Would like to see the =
system force that the first letter in both names is capitalized and that =
the first and last names have a space between them.Update =
11/18 – Still working to make sure we are using tablets or writing =
the report for all billed linesUpdate =
12/01 – Jennifer will start working with the team members to make =
sure that either we get an import paper or a time study on the tablet =
for every a-card.Update =
12/16 – Aaron will review the system process of recording time =
against an a-card to ensure that there are no issues that could result =
in an error where we though the time study was entered but the system =
does not show a time study for that a-card. Jennifer and Aaron to work =
back and forth until we see each day showing either a time study import =
or a time study from the tablet for every a-card =
record.Update =
1/6 – GREAT JOB!! We have had a day where we had 0 time studies =
missed. That means that everything was captured either by manual import =
or tablet time study. Now we need to focus on getting the manual time =
studies down to as low as possible.Update =
1/12 – Aaron will look at the report and verify that we are =
handling overage a-cards properly and that we are not getting false =
positive reports stating that a-cards are not getting a time study. =
After the fix that eliminated some of the time study errors. =
Aaron =
will go see if a process can be added to merge the quantity from the =
overage a-card to the original a-card so when we calculate the average =
rate per piece it takes in to consideration all parts =
processedUpdate =
1/19 – Aaron still working on getting the quantity from overage =
a-cars merged with original a-card so that the average time per piece is =
correct.We had =
an issue where we were not able to upload our time studies. Mike to look =
and see how we prevent that in the future or if we cannot prevent it if =
there is a way to recover from it and mitigate the loss of time studies =
in the future
Thanks,
James
From: James Hartzler =
Sent: Thursday, January 12, 2023 10:33 AM
To: =
‘Michael Reed’ <reed@rmrdevelopment.com>; =
‘Aaron Jones’ <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Friday 01/19 @ 10:00am EST =
/ 9:00am CST.
See below for updates =
from 01/12 meeting.
Screen =
scrape / Data import from excel reportMike is =
working on getting access to the remote Tolas sessions from our devices. =
Once he does he will work on screen scraping all the data on an a-card =
so we no longer have to have several people working to scan every a-card =
in to our systemUpdate =
12/02 – Navistar has responded and we now import all a-cards =
repack or standard and do not have to scan them =
anymore.Update =
12/16 – Waiting to hear back from Bob on issues with Repack cards. =
Mike and or Aaron to continue reaching out to Bob until this is =
resolvedUpdate =
01/06 – Bob is reaching out to Tolas, waiting for their feedback =
before making any changes. Jennifer said the 2:00pm report is now empty =
and there is a new report that comes at 3:00pm and it has data and =
works. Aaron will reach out to Bob and let him know about the 2 and 3pm =
reports and how they are now different.Update =
01/12 – 2:00pm report now works. Bob is still waiting for Tolas =
support to respond but he was going to reach back out to them for an =
update, we still need more current repack records in the report. Repack =
is basically a day behind so we are still manually scanning =
repack.
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update =
11/11 – Need to work on this after we get pricing =
updatedUpdate =
11/18 – Pending pricing upgrading to finalize. Aaron and Mike to =
review before we turn it on to make sure it works.Update =
12/01 – Everything is in place but we need to add a way to fix in =
the average cost by item every month. So that reports in the future are =
always giving us the cost of material based on that month’s =
average cost at that time.Update =
12/16 – In progress. Need to refine data capture of receipts, =
usage, scrap, inventory adjustments due to using lumber on non-woodshop =
processes, month end inventory entries. Need to pilot for accuracy and =
then roll out to floor. ETA to using this in production is the week of =
01/09Update =
01/06 – Mike added the adjustments from the tablet. Aaron added a =
way to enter dates manually so that it doesn’t just record the =
date that they are entering the receipt.International parts (which are the container numbers for woodshop) =
have a BOM that is comprised of matrix billing codes. Matrix billing =
codes have a BOM that is made up of the actual lumber pieces and =
dimensions they are using plus the labels, bands, corrugate =
etc.Update =
01/12 – James and RMR to review in person after the 01/12 team =
meeting.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate =
10/07 – Aaron will work to modify or create a new report that =
gives us more detail on the a-cards that do not have time =
studiesUpdate =
10/13 – Mike will be onsite to determine the cause of the tablet =
issues that prevent us from being able to enter all of our time studies =
with them. Is this network or hardware related, or both? How do we fix =
this issue?Update =
10/24 – Time studies report – We seen improvement =
from week of 10/17 to week of 10/24 on the percent of a-cards that had a =
time study verses those that didn’t. Good Job!! Aaron sent the =
updated reports to Fernando so that he could have a meeting with his =
team to let them know we still has some room for improvement. =
Labor Efficiency Report – Mike to work on data entry =
fields so that it is a bit more error proof. Would like to see the =
system force that the first letter in both names is capitalized and that =
the first and last names have a space between them.Update =
11/18 – Still working to make sure we are using tablets or writing =
the report for all billed linesUpdate =
12/01 – Jennifer will start working with the team members to make =
sure that either we get an import paper or a time study on the tablet =
for every a-card.Update =
12/16 – Aaron will review the system process of recording time =
against an a-card to ensure that there are no issues that could result =
in an error where we though the time study was entered but the system =
does not show a time study for that a-card. Jennifer and Aaron to work =
back and forth until we see each day showing either a time study import =
or a time study from the tablet for every a-card =
record.Update =
1/6 – GREAT JOB!! We have had a day where we had 0 time studies =
missed. That means that everything was captured either by manual import =
or tablet time study. Now we need to focus on getting the manual time =
studies down to as low as possible.Update =
1/12 – Aaron will look at the report and verify that we are =
handling overage a-cards properly and that we are not getting false =
positive reports stating that a-cards are not getting a time study. =
After the fix that eliminated some of the time study errors. =
Aaron =
will go see if a process can be added to merge the quantity from the =
overage a-card to the original a-card so when we calculate the average =
rate per piece it takes in to consideration all parts =
processed
Thanks,
James
From: James Hartzler =
Sent: Friday, January 6, 2023 11:36 AM
To: Michael =
Reed <reed@rmrdevelopment.com>; =
Aaron Jones <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Friday 01/12 @ 10:00am EST =
/ 9:00am CST.
See below for updates =
from 01/06 meeting.
Screen =
scrape / Data import from excel reportMike is =
working on getting access to the remote Tolas sessions from our devices. =
Once he does he will work on screen scraping all the data on an a-card =
so we no longer have to have several people working to scan every a-card =
in to our systemUpdate =
12/02 – Navistar has responded and we now import all a-cards =
repack or standard and do not have to scan them =
anymore.Update =
12/16 – Waiting to hear back from Bob on issues with Repack cards. =
Mike and or Aaron to continue reaching out to Bob until this is =
resolvedUpdate =
01/06 – Bob is reaching out to Tolas, waiting for their feedback =
before making any changes. Jennifer said the 2:00pm report is now empty =
and there is a new report that comes at 3:00pm and it has data and =
works. Aaron will reach out to Bob and let him know about the 2 and 3pm =
reports and how they are now different.
New =
system to track the projects where we will buy parts and sell them back =
to the customerMeeting =
on Friday 4/8 with Aaron, Mike, and James to review =
furtherUpdate =
9/16 – James has had to take on AR and AP from Rea & Assoc. =
and as a result asked for an extension of two weeks on getting together =
on this with Mike.Update =
9/23 – James and Mike have this on hold – will reconvene =
next week.Update =
9/30 – James and Mike to meet the following =
week.Update =
10/7 – James and Mike have rescheduled for two weeks =
out.Update =
10/24 – Permanently put on hold until further notice from =
James
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update =
11/11 – Need to work on this after we get pricing =
updatedUpdate =
11/18 – Pending pricing upgrading to finalize. Aaron and Mike to =
review before we turn it on to make sure it works.Update =
12/01 – Everything is in place but we need to add a way to fix in =
the average cost by item every month. So that reports in the future are =
always giving us the cost of material based on that month’s =
average cost at that time.Update =
12/16 – In progress. Need to refine data capture of receipts, =
usage, scrap, inventory adjustments due to using lumber on non-woodshop =
processes, month end inventory entries. Need to pilot for accuracy and =
then roll out to floor. ETA to using this in production is the week of =
01/09Update =
01/06 – Mike added the adjustments from the tablet. Aaron added a =
way to enter dates manually so that it doesn’t just record the =
date that they are entering the receipt.International parts (which are the container numbers for woodshop) =
have a BOM that is comprised of matrix billing codes. Matrix billing =
codes have a BOM that is made up of the actual lumber pieces and =
dimensions they are using plus the labels, bands, corrugate =
etc.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate =
10/07 – Aaron will work to modify or create a new report that =
gives us more detail on the a-cards that do not have time =
studiesUpdate =
10/13 – Mike will be onsite to determine the cause of the tablet =
issues that prevent us from being able to enter all of our time studies =
with them. Is this network or hardware related, or both? How do we fix =
this issue?Update =
10/24 – Time studies report – We seen improvement =
from week of 10/17 to week of 10/24 on the percent of a-cards that had a =
time study verses those that didn’t. Good Job!! Aaron sent the =
updated reports to Fernando so that he could have a meeting with his =
team to let them know we still has some room for improvement. =
Labor Efficiency Report – Mike to work on data entry =
fields so that it is a bit more error proof. Would like to see the =
system force that the first letter in both names is capitalized and that =
the first and last names have a space between them.Update =
11/18 – Still working to make sure we are using tablets or writing =
the report for all billed linesUpdate =
12/01 – Jennifer will start working with the team members to make =
sure that either we get an import paper or a time study on the tablet =
for every a-card.Update =
12/16 – Aaron will review the system process of recording time =
against an a-card to ensure that there are no issues that could result =
in an error where we though the time study was entered but the system =
does not show a time study for that a-card. Jennifer and Aaron to work =
back and forth until we see each day showing either a time study import =
or a time study from the tablet for every a-card =
record.Update =
1/6 – GREAT JOB!! We have had a day where we had 0 time studies =
missed. That means that everything was captured either by manual import =
or tablet time study. Now we need to focus on getting the manual time =
studies down to as low as possible.
Thanks,
James
From: James Hartzler =
Sent: Friday, December 16, 2022 10:56 AM
To: =
‘Michael Reed’ <reed@rmrdevelopment.com>; =
‘Aaron Jones’ <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Friday 01/06 @ 10:00am EST =
/ 9:00am CST.
See below for updates =
from 12/16 meeting.
Screen =
scrape / Data import from excel reportMike is =
working on getting access to the remote Tolas sessions from our devices. =
Once he does he will work on screen scraping all the data on an a-card =
so we no longer have to have several people working to scan every a-card =
in to our systemUpdate =
12/02 – Navistar has responded and we now import all a-cards =
repack or standard and do not have to scan them =
anymore.Update =
12/16 – Waiting to hear back from Bob on issues with Repack cards. =
Mike and or Aaron to continue reaching out to Bob until this is =
resolved
New =
system to track the projects where we will buy parts and sell them back =
to the customerMeeting =
on Friday 4/8 with Aaron, Mike, and James to review =
furtherUpdate =
9/16 – James has had to take on AR and AP from Rea & Assoc. =
and as a result asked for an extension of two weeks on getting together =
on this with Mike.Update =
9/23 – James and Mike have this on hold – will reconvene =
next week.Update =
9/30 – James and Mike to meet the following =
week.Update =
10/7 – James and Mike have rescheduled for two weeks =
out.Update =
10/24 – Permanently put on hold until further notice from =
James
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update =
11/11 – Need to work on this after we get pricing =
updatedUpdate =
11/18 – Pending pricing upgrading to finalize. Aaron and Mike to =
review before we turn it on to make sure it works.Update =
12/01 – Everything is in place but we need to add a way to fix in =
the average cost by item every month. So that reports in the future are =
always giving us the cost of material based on that month’s =
average cost at that time.Update =
12/16 – In progress. Need to refine data capture of receipts, =
usage, scrap, inventory adjustments due to using lumber on non-woodshop =
processes, month end inventory entries. Need to pilot for accuracy and =
then roll out to floor. ETA to using this in production is the week of =
01/09
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate =
10/07 – Aaron will work to modify or create a new report that =
gives us more detail on the a-cards that do not have time =
studiesUpdate =
10/13 – Mike will be onsite to determine the cause of the tablet =
issues that prevent us from being able to enter all of our time studies =
with them. Is this network or hardware related, or both? How do we fix =
this issue?Update =
10/24 – Time studies report – We seen improvement =
from week of 10/17 to week of 10/24 on the percent of a-cards that had a =
time study verses those that didn’t. Good Job!! Aaron sent the =
updated reports to Fernando so that he could have a meeting with his =
team to let them know we still has some room for improvement. =
Labor Efficiency Report – Mike to work on data entry =
fields so that it is a bit more error proof. Would like to see the =
system force that the first letter in both names is capitalized and that =
the first and last names have a space between them.Update =
11/18 – Still working to make sure we are using tablets or writing =
the report for all billed linesUpdate =
12/01 – Jennifer will start working with the team members to make =
sure that either we get an import paper or a time study on the tablet =
for every a-card.Update =
12/16 – Aaron will review the system process of recording time =
against an a-card to ensure that there are no issues that could result =
in an error where we though the time study was entered but the system =
does not show a time study for that a-card. Jennifer and Aaron to work =
back and forth until we see each day showing either a time study import =
or a time study from the tablet for every a-card =
record.
Thanks,
James
From: James Hartzler =
Sent: Thursday, December 1, 2022 12:04 PM
To: =
Michael Reed <reed@rmrdevelopment.com>; =
Aaron Jones <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Friday 12/16 @ 10:00am EST =
/ 9:00am CST.
See below for updates =
from 12/01 meeting.
Screen =
scrape / Data import from excel reportMike is =
working on getting access to the remote Tolas sessions from our devices. =
Once he does he will work on screen scraping all the data on an a-card =
so we no longer have to have several people working to scan every a-card =
in to our systemUpdate =
9/16 – Mike and Fernando will continue to try and reach Navistar =
for help. They have not responded yet.Update =
9/23 – No response from Navistar yet. Fernando and Mike will =
continue to reach out.Update =
9/30 – No response from Navistar. Fernando and Mike will keep =
working on getting a response.Update =
10/07 – Mike and Fernando tried to reach Navistar rep through =
Teams and email. They will try again this week, email , Teams, and =
voicemail.Update =
10/13 – No response to Fernando or Mike’s follow up. They =
will continue to reach out weekly and Fernando will ask Travis for =
further guidance on connecting with Navistar.Update =
10/24 – Mike and Fernando still have not received a response. Will =
continue to follow up.Update =
11/11 – We got a response from Navistar but we still need to =
continue to follow up. We do not have what we need yet. Fernando will =
talk to Dave and reach out on Teams. Mike will send =
email.Update =
11/18 – Navistar is communicating with us. Mike and or Aaron will =
reply all to their email providing the detail we =
want.Update =
12/02 – Navistar has responded and we now import all a-cards =
repack or standard and do not have to scan them =
anymore.Closing this issue
New =
system to track the projects where we will buy parts and sell them back =
to the customerMeeting =
on Friday 4/8 with Aaron, Mike, and James to review =
furtherUpdate =
9/16 – James has had to take on AR and AP from Rea & Assoc. =
and as a result asked for an extension of two weeks on getting together =
on this with Mike.Update =
9/23 – James and Mike have this on hold – will reconvene =
next week.Update =
9/30 – James and Mike to meet the following =
week.Update =
10/7 – James and Mike have rescheduled for two weeks =
out.Update =
10/24 – Permanently put on hold until further notice from =
James
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update =
11/11 – Need to work on this after we get pricing =
updatedUpdate =
11/18 – Pending pricing upgrading to finalize. Aaron and Mike to =
review before we turn it on to make sure it works.Update =
12/01 – Everything is in place but we need to add a way to fix in =
the average cost by item every month. So that reports in the future are =
always giving us the cost of material based on that month’s =
average cost at that time.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate =
10/07 – Aaron will work to modify or create a new report that =
gives us more detail on the a-cards that do not have time =
studiesUpdate =
10/13 – Mike will be onsite to determine the cause of the tablet =
issues that prevent us from being able to enter all of our time studies =
with them. Is this network or hardware related, or both? How do we fix =
this issue?Update =
10/24 – Time studies report – We seen improvement =
from week of 10/17 to week of 10/24 on the percent of a-cards that had a =
time study verses those that didn’t. Good Job!! Aaron sent the =
updated reports to Fernando so that he could have a meeting with his =
team to let them know we still has some room for improvement. =
Labor Efficiency Report – Mike to work on data entry =
fields so that it is a bit more error proof. Would like to see the =
system force that the first letter in both names is capitalized and that =
the first and last names have a space between them.Update =
11/18 – Still working to make sure we are using tablets or writing =
the report for all billed linesUpdate =
12/01 – Jennifer will start working with the team members to make =
sure that either we get an import paper or a time study on the tablet =
for every a-card.
Thanks,
James
From: James Hartzler =
Sent: Friday, November 18, 2022 10:33 AM
To: =
Michael Reed <reed@rmrdevelopment.com>; =
Aaron Jones <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Friday 12/02 @ 10:00am EST =
/ 9:00am CST.
See below for updates =
from 11/18 meeting.
Screen =
scrape / Data import from excel reportMike is =
working on getting access to the remote Tolas sessions from our devices. =
Once he does he will work on screen scraping all the data on an a-card =
so we no longer have to have several people working to scan every a-card =
in to our systemUpdate =
9/16 – Mike and Fernando will continue to try and reach Navistar =
for help. They have not responded yet.Update =
9/23 – No response from Navistar yet. Fernando and Mike will =
continue to reach out.Update =
9/30 – No response from Navistar. Fernando and Mike will keep =
working on getting a response.Update =
10/07 – Mike and Fernando tried to reach Navistar rep through =
Teams and email. They will try again this week, email , Teams, and =
voicemail.Update =
10/13 – No response to Fernando or Mike’s follow up. They =
will continue to reach out weekly and Fernando will ask Travis for =
further guidance on connecting with Navistar.Update =
10/24 – Mike and Fernando still have not received a response. Will =
continue to follow up.Update =
11/11 – We got a response from Navistar but we still need to =
continue to follow up. We do not have what we need yet. Fernando will =
talk to Dave and reach out on Teams. Mike will send =
email.Update =
11/18 – Navistar is communicating with us. Mike and or Aaron will =
reply all to their email providing the detail we =
want.
New =
system to track the projects where we will buy parts and sell them back =
to the customerMeeting =
on Friday 4/8 with Aaron, Mike, and James to review =
furtherUpdate =
9/16 – James has had to take on AR and AP from Rea & Assoc. =
and as a result asked for an extension of two weeks on getting together =
on this with Mike.Update =
9/23 – James and Mike have this on hold – will reconvene =
next week.Update =
9/30 – James and Mike to meet the following =
week.Update =
10/7 – James and Mike have rescheduled for two weeks =
out.Update =
10/24 – Permanently put on hold until further notice from =
James
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update =
11/11 – Need to work on this after we get pricing =
updatedUpdate =
11/18 – Pending pricing upgrading to finalize. Aaron and Mike to =
review before we turn it on to make sure it =
works.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate =
10/07 – Aaron will work to modify or create a new report that =
gives us more detail on the a-cards that do not have time =
studiesUpdate =
10/13 – Mike will be onsite to determine the cause of the tablet =
issues that prevent us from being able to enter all of our time studies =
with them. Is this network or hardware related, or both? How do we fix =
this issue?Update =
10/24 – Time studies report – We seen improvement =
from week of 10/17 to week of 10/24 on the percent of a-cards that had a =
time study verses those that didn’t. Good Job!! Aaron sent the =
updated reports to Fernando so that he could have a meeting with his =
team to let them know we still has some room for improvement. =
Labor Efficiency Report – Mike to work on data entry =
fields so that it is a bit more error proof. Would like to see the =
system force that the first letter in both names is capitalized and that =
the first and last names have a space between them.Update =
11/18 – Still working to make sure we are using tablets or writing =
the report for all billed lines
Thanks,
James
From: James Hartzler =
Sent: Friday, November 11, 2022 11:14 AM
To: =
‘Michael Reed’ <reed@rmrdevelopment.com>; =
‘Aaron Jones’ <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Friday 11/18 @ 10:00am EST =
/ 9:00am CST.
See below for updates =
from 11/11 meeting.
Screen =
scrape / Data import from excel reportMike is =
working on getting access to the remote Tolas sessions from our devices. =
Once he does he will work on screen scraping all the data on an a-card =
so we no longer have to have several people working to scan every a-card =
in to our systemUpdate =
9/16 – Mike and Fernando will continue to try and reach Navistar =
for help. They have not responded yet.Update =
9/23 – No response from Navistar yet. Fernando and Mike will =
continue to reach out.Update =
9/30 – No response from Navistar. Fernando and Mike will keep =
working on getting a response.Update =
10/07 – Mike and Fernando tried to reach Navistar rep through =
Teams and email. They will try again this week, email , Teams, and =
voicemail.Update =
10/13 – No response to Fernando or Mike’s follow up. They =
will continue to reach out weekly and Fernando will ask Travis for =
further guidance on connecting with Navistar.Update =
10/24 – Mike and Fernando still have not received a response. Will =
continue to follow up.Update =
11/11 – We got a response from Navistar but we still need to =
continue to follow up. We do not have what we need yet. Fernando will =
talk to Dave and reach out on Teams. Mike will send =
email.
New =
system to track the projects where we will buy parts and sell them back =
to the customerMeeting =
on Friday 4/8 with Aaron, Mike, and James to review =
furtherUpdate =
9/16 – James has had to take on AR and AP from Rea & Assoc. =
and as a result asked for an extension of two weeks on getting together =
on this with Mike.Update =
9/23 – James and Mike have this on hold – will reconvene =
next week.Update =
9/30 – James and Mike to meet the following =
week.Update =
10/7 – James and Mike have rescheduled for two weeks =
out.Update =
10/24 – Permanently put on hold until further notice from =
James
WoodshopNeed to =
work on and implement material tracking – what did each a-card use =
for lumber?Update =
11/11 – Need to work on this after we get pricing =
updated
Woodshop =
– closedMike has =
developed a workflow for that areaWe need =
to build a system that:Tracks =
material used to the a-card for each container we build (cardboard, =
wood, for sure and possibly nails and or staples or whatever else is =
used?)We =
should take a pictures of the various containers we build so it is easy =
to see and understand what is being built and tie that to the container =
recordWe will =
need to build out a table for all the materials we will be buying (part =
number, description, quantity, price we pay)Inventory system that tracks beginning inventory + purchase =
– usage – scrap – returns =3D ending inventory for all =
parts we buyWe will =
need a way to cycle count / do physical inventories where we can adjust =
the on hand QTY as needed to match realityDevelop =
a change log for each part so we can see transactionally everything that =
takes place on parts we buy, tracking it from receipt through =
shipmentUpdate =
9/23 – Mike has started putting together screens for this. =
Jennifer and Mike to review together on Monday.Update =
9/30 – Mike still need to get with Jennifer to =
review.Update =
10/07 – Mike and Jennifer have talked. Mike has it figured out, =
and knows what he needs to do. Should have it done by Tuesday or =
Wednesday 11th or 12th and we should be able to =
use this in production next week. That would mean that all a-cards =
(regular or repack) in woodshop can have time studies done on =
them.Update =
10/13 – Mike has this completed but has not pushed it out for end =
users to use. This should go out once he resolves and issue with the =
current version we are using today. Tentatively looking to complete the =
push so end users can use this new update by the end of the =
week.Update =
10/24 – Mike stated that the system update has been delivered that =
would allow all a-cards (standard and repack) to be processed by =
woodshop team. Jennifer will now go to woodshop team and make sure they =
are using the system for ALL a-cards regardless of what type they are =
(repack or standard).Update =
11/11 – Jennifer confirmed that the system is working for all =
a-card types in the woodshop area.Item is =
closed
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate =
10/07 – Aaron will work to modify or create a new report that =
gives us more detail on the a-cards that do not have time =
studiesUpdate =
10/13 – Mike will be onsite to determine the cause of the tablet =
issues that prevent us from being able to enter all of our time studies =
with them. Is this network or hardware related, or both? How do we fix =
this issue?Update =
10/24 – Time studies report – We seen improvement =
from week of 10/17 to week of 10/24 on the percent of a-cards that had a =
time study verses those that didn’t. Good Job!! Aaron sent the =
updated reports to Fernando so that he could have a meeting with his =
team to let them know we still has some room for improvement. =
Labor Efficiency Report – Mike to work on data entry =
fields so that it is a bit more error proof. Would like to see the =
system force that the first letter in both names is capitalized and that =
the first and last names have a space between =
them.
Thanks,
James
From: James Hartzler =
Sent: Monday, October 24, 2022 11:31 AM
To: Michael =
Reed <reed@rmrdevelopment.com>; =
Aaron Jones <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Friday 11/04 @ 10:00am EST =
/ 9:00am CST.
See below for updates =
from 10/24 meeting.
Screen =
scrape / Data import from excel reportMike is =
working on getting access to the remote Tolas sessions from our devices. =
Once he does he will work on screen scraping all the data on an a-card =
so we no longer have to have several people working to scan every a-card =
in to our systemUpdate =
9/16 – Mike and Fernando will continue to try and reach Navistar =
for help. They have not responded yet.Update =
9/23 – No response from Navistar yet. Fernando and Mike will =
continue to reach out.Update =
9/30 – No response from Navistar. Fernando and Mike will keep =
working on getting a response.Update =
10/07 – Mike and Fernando tried to reach Navistar rep through =
Teams and email. They will try again this week, email , Teams, and =
voicemail.Update =
10/13 – No response to Fernando or Mike’s follow up. They =
will continue to reach out weekly and Fernando will ask Travis for =
further guidance on connecting with Navistar.Update =
10/24 – Mike and Fernando still have not received a response. Will =
continue to follow up.
New =
system to track the projects where we will buy parts and sell them back =
to the customerMeeting =
on Friday 4/8 with Aaron, Mike, and James to review =
furtherUpdate =
9/16 – James has had to take on AR and AP from Rea & Assoc. =
and as a result asked for an extension of two weeks on getting together =
on this with Mike.Update =
9/23 – James and Mike have this on hold – will reconvene =
next week.Update =
9/30 – James and Mike to meet the following =
week.Update =
10/7 – James and Mike have rescheduled for two weeks =
out.Update =
10/24 – Permanently put on hold until further notice from =
James
WoodshopMike has =
developed a workflow for that areaWe need =
to build a system that:Tracks =
material used to the a-card for each container we build (cardboard, =
wood, for sure and possibly nails and or staples or whatever else is =
used?)We =
should take a pictures of the various containers we build so it is easy =
to see and understand what is being built and tie that to the container =
recordWe will =
need to build out a table for all the materials we will be buying (part =
number, description, quantity, price we pay)Inventory system that tracks beginning inventory + purchase =
– usage – scrap – returns =3D ending inventory for all =
parts we buyWe will =
need a way to cycle count / do physical inventories where we can adjust =
the on hand QTY as needed to match realityDevelop =
a change log for each part so we can see transactionally everything that =
takes place on parts we buy, tracking it from receipt through =
shipmentUpdate =
9/23 – Mike has started putting together screens for this. =
Jennifer and Mike to review together on Monday.Update =
9/30 – Mike still need to get with Jennifer to =
review.Update =
10/07 – Mike and Jennifer have talked. Mike has it figured out, =
and knows what he needs to do. Should have it done by Tuesday or =
Wednesday 11th or 12th and we should be able to =
use this in production next week. That would mean that all a-cards =
(regular or repack) in woodshop can have time studies done on =
them.Update =
10/13 – Mike has this completed but has not pushed it out for end =
users to use. This should go out once he resolves and issue with the =
current version we are using today. Tentatively looking to complete the =
push so end users can use this new update by the end of the =
week.Update =
10/24 – Mike stated that the system update has been delivered that =
would allow all a-cards (standard and repack) to be processed by =
woodshop team. Jennifer will now go to woodshop team and make sure they =
are using the system for ALL a-cards regardless of what type they are =
(repack or standard).
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate =
10/07 – Aaron will work to modify or create a new report that =
gives us more detail on the a-cards that do not have time =
studiesUpdate =
10/13 – Mike will be onsite to determine the cause of the tablet =
issues that prevent us from being able to enter all of our time studies =
with them. Is this network or hardware related, or both? How do we fix =
this issue?Update =
10/24 – Time studies report – We seen improvement =
from week of 10/17 to week of 10/24 on the percent of a-cards that had a =
time study verses those that didn’t. Good Job!! Aaron sent the =
updated reports to Fernando so that he could have a meeting with his =
team to let them know we still has some room for improvement. =
Labor Efficiency Report – Mike to work on data entry =
fields so that it is a bit more error proof. Would like to see the =
system force that the first letter in both names is capitalized and that =
the first and last names have a space between =
them.
Thanks,
James
From: James Hartzler =
Sent: Thursday, October 13, 2022 12:02 PM
To: =
Michael Reed <reed@rmrdevelopment.com>; =
Aaron Jones <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Friday 10/21 @ 1:00pm EST / =
12:00pm CST.
See below for updates =
from 10/13 meeting.
One =
tablet went bad:Update =
10/07 – Mike will check and see if the device is still covered =
under the manufacturer’s warranty. He will also order Jennifer 10 =
more charging cables and the charging cubes that go with the cables. =
Mike will place an order for another backup device if the one that went =
bad is not covered under a warranty.Update =
10/13 – Tablet was ordered and received. Charging cables and cubes =
were ordered and received. Item is =
closed.
Screen =
scrape / Data import from excel reportMike is =
working on getting access to the remote Tolas sessions from our devices. =
Once he does he will work on screen scraping all the data on an a-card =
so we no longer have to have several people working to scan every a-card =
in to our systemUpdate =
9/16 – Mike and Fernando will continue to try and reach Navistar =
for help. They have not responded yet.Update =
9/23 – No response from Navistar yet. Fernando and Mike will =
continue to reach out.Update =
9/30 – No response from Navistar. Fernando and Mike will keep =
working on getting a response.Update =
10/07 – Mike and Fernando tried to reach Navistar rep through =
Teams and email. They will try again this week, email , Teams, and =
voicemail.Update =
10/13 – No response to Fernando or Mike’s follow up. They =
will continue to reach out weekly and Fernando will ask Travis for =
further guidance on connecting with =
Navistar.
New =
system to track the projects where we will buy parts and sell them back =
to the customerMeeting =
on Friday 4/8 with Aaron, Mike, and James to review =
furtherUpdate =
9/16 – James has had to take on AR and AP from Rea & Assoc. =
and as a result asked for an extension of two weeks on getting together =
on this with Mike.Update =
9/23 – James and Mike have this on hold – will reconvene =
next week.Update =
9/30 – James and Mike to meet the following =
week.Update =
10/7 – James and Mike have rescheduled for two weeks =
out.
WoodshopMike has =
developed a workflow for that areaWe need =
to build a system that:Tracks =
material used to the a-card for each container we build (cardboard, =
wood, for sure and possibly nails and or staples or whatever else is =
used?)We =
should take a pictures of the various containers we build so it is easy =
to see and understand what is being built and tie that to the container =
recordWe will =
need to build out a table for all the materials we will be buying (part =
number, description, quantity, price we pay)Inventory system that tracks beginning inventory + purchase =
– usage – scrap – returns =3D ending inventory for all =
parts we buyWe will =
need a way to cycle count / do physical inventories where we can adjust =
the on hand QTY as needed to match realityDevelop =
a change log for each part so we can see transactionally everything that =
takes place on parts we buy, tracking it from receipt through =
shipmentUpdate =
9/23 – Mike has started putting together screens for this. =
Jennifer and Mike to review together on Monday.Update =
9/30 – Mike still need to get with Jennifer to =
review.Update =
10/07 – Mike and Jennifer have talked. Mike has it figured out, =
and knows what he needs to do. Should have it done by Tuesday or =
Wednesday 11th or 12th and we should be able to =
use this in production next week. That would mean that all a-cards =
(regular or repack) in woodshop can have time studies done on =
them.Update =
10/13 – Mike has this completed but has not pushed it out for end =
users to use. This should go out once he resolves and issue with the =
current version we are using today. Tentatively looking to complete the =
push so end users can use this new update by the end of the =
week.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate =
10/07 – Aaron will work to modify or create a new report that =
gives us more detail on the a-cards that do not have time =
studiesUpdate =
10/13 – Mike will be onsite to determine the cause of the tablet =
issues that prevent us from being able to enter all of our time studies =
with them. Is this network or hardware related, or both? How do we fix =
this issue?
Thanks,
James
From: James Hartzler =
Sent: Friday, October 7, 2022 11:48 AM
To: Michael =
Reed <reed@rmrdevelopment.com>; =
Aaron Jones <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Thursday 10/13 @ 11:00am =
EST / 10:00am CST.
See below for updates =
from 10/07 meeting.
One =
tablet went bad:Update =
10/07 – Mike will check and see if the device is still covered =
under the manufacturer’s warranty. He will also order Jennifer 10 =
more charging cables and the charging cubes that go with the cables. =
Mike will place an order for another backup device if the one that went =
bad is not covered under a warranty.
Screen =
scrape / Data import from excel reportMike is =
working on getting access to the remote Tolas sessions from our devices. =
Once he does he will work on screen scraping all the data on an a-card =
so we no longer have to have several people working to scan every a-card =
in to our systemUpdate =
9/16 – Mike and Fernando will continue to try and reach Navistar =
for help. They have not responded yet.Update =
9/23 – No response from Navistar yet. Fernando and Mike will =
continue to reach out.Update =
9/30 – No response from Navistar. Fernando and Mike will keep =
working on getting a response.Update =
10/07 – Mike and Fernando tried to reach Navistar rep through =
Teams and email. They will try again this week, email , Teams, and =
voicemail.
New =
system to track the projects where we will buy parts and sell them back =
to the customerMeeting =
on Friday 4/8 with Aaron, Mike, and James to review =
furtherUpdate =
9/16 – James has had to take on AR and AP from Rea & Assoc. =
and as a result asked for an extension of two weeks on getting together =
on this with Mike.Update =
9/23 – James and Mike have this on hold – will reconvene =
next week.Update =
9/30 – James and Mike to meet the following =
week.Update =
10/7 – James and Mike have rescheduled for two weeks =
out.
WoodshopMike has =
developed a workflow for that areaWe need =
to build a system that:Tracks =
material used to the a-card for each container we build (cardboard, =
wood, for sure and possibly nails and or staples or whatever else is =
used?)We =
should take a pictures of the various containers we build so it is easy =
to see and understand what is being built and tie that to the container =
recordWe will =
need to build out a table for all the materials we will be buying (part =
number, description, quantity, price we pay)Inventory system that tracks beginning inventory + purchase =
– usage – scrap – returns =3D ending inventory for all =
parts we buyWe will =
need a way to cycle count / do physical inventories where we can adjust =
the on hand QTY as needed to match realityDevelop =
a change log for each part so we can see transactionally everything that =
takes place on parts we buy, tracking it from receipt through =
shipmentUpdate =
9/23 – Mike has started putting together screens for this. =
Jennifer and Mike to review together on Monday.Update =
9/30 – Mike still need to get with Jennifer to =
review.Update =
10/07 – Mike and Jennifer have talked. Mike has it figured out, =
and knows what he needs to do. Should have it done by Tuesday or =
Wednesday 11th or 12th and we should be able to =
use this in production next week. That would mean that all a-cards =
(regular or repack) in woodshop can have time studies done on =
them.
Review =
the Acard with Time Studies report – look at labor efficiency =
reportUpdate =
10/07 – Aaron will work to modify or create a new report that =
gives us more detail on the a-cards that do not have time =
studies
Labor =
efficiency reportWe need =
to know the amount of time (on average) that an employee is =
working on an a-card and the amount of time they are not working on any =
a-cards. Update =
9/16 – Mike and Aaron reviewed. We will wait for Aaron to give us =
an update at the next meeting.Update =
9/23 – James, Mike, and Aaron met on Thursday 9/22 and agreed on a =
path forward. Aaron is targeting something to review by next =
meeting.Update 9/30 – Aaron is about done. 90% complete. The =
majority of it is working and making the numbers look a lot better. We =
should be able to review at the next meeting.Update =
10/07 – Aaron showed us a working example of the report – =
this issue is =
closed.
Thanks,
James
From: James Hartzler =
Sent: Friday, September 30, 2022 1:14 PM
To: =
Michael Reed <reed@rmrdevelopment.com>; =
Aaron Jones <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Friday 10/07 @ 12:00pm noon =
EST / 11:00am CST.
See below for updates =
from 09/30 meeting.
Screen =
scrape / Data import from excel reportMike is =
working on getting access to the remote Tolas sessions from our devices. =
Once he does he will work on screen scraping all the data on an a-card =
so we no longer have to have several people working to scan every a-card =
in to our systemUpdate =
9/16 – Mike and Fernando will continue to try and reach Navistar =
for help. They have not responded yet.Update =
9/23 – No response from Navistar yet. Fernando and Mike will =
continue to reach out.Update =
9/30 – No response from Navistar. Fernando and Mike will keep =
working on getting a response.
New =
system to track the projects where we will buy parts and sell them back =
to the customerMeeting =
on Friday 4/8 with Aaron, Mike, and James to review =
furtherUpdate =
9/16 – James has had to take on AR and AP from Rea & Assoc. =
and as a result asked for an extension of two weeks on getting together =
on this with Mike.Update =
9/23 – James and Mike have this on hold – will reconvene =
next week.Update =
9/30 – James and Mike to meet the following =
week.
WoodshopMike has =
developed a workflow for that areaWe need =
to build a system that:Tracks =
material used to the a-card for each container we build (cardboard, =
wood, for sure and possibly nails and or staples or whatever else is =
used?)We =
should take a pictures of the various containers we build so it is easy =
to see and understand what is being built and tie that to the container =
recordWe will =
need to build out a table for all the materials we will be buying (part =
number, description, quantity, price we pay)Inventory system that tracks beginning inventory + purchase =
– usage – scrap – returns =3D ending inventory for all =
parts we buyWe will =
need a way to cycle count / do physical inventories where we can adjust =
the on hand QTY as needed to match realityDevelop =
a change log for each part so we can see transactionally everything that =
takes place on parts we buy, tracking it from receipt through =
shipmentUpdate =
9/23 – Mike has started putting together screens for this. =
Jennifer and Mike to review together on Monday.Update =
9/30 – Mike still need to get with Jennifer to =
review.
Labor =
efficiency reportWe need =
to know the amount of time (on average) that an employee is =
working on an a-card and the amount of time they are not working on any =
a-cards. Update =
9/16 – Mike and Aaron reviewed. We will wait for Aaron to give us =
an update at the next meeting.Update =
9/23 – James, Mike, and Aaron met on Thursday 9/22 and agreed on a =
path forward. Aaron is targeting something to review by next =
meeting.Update 9/30 – Aaron is about done. 90% complete. The =
majority of it is working and making the numbers look a lot better. We =
should be able to review at the next =
meeting.
Thanks,
James
From: James Hartzler =
Sent: Friday, September 23, 2022 10:00 AM
To: =
Michael Reed <reed@rmrdevelopment.com>; =
Aaron Jones <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Friday 09/30 @ 1:00pm EST / =
12:00pm CST.
See below for updates =
from 09/23 meeting.
Screen =
scrape / Data import from excel reportMike is =
working on getting access to the remote Tolas sessions from our devices. =
Once he does he will work on screen scraping all the data on an a-card =
so we no longer have to have several people working to scan every a-card =
in to our systemUpdate =
9/16 – Mike and Fernando will continue to try and reach Navistar =
for help. They have not responded yet.Update =
9/23 – No response from Navistar yet. Fernando and Mike will =
continue to reach out.
New =
system to track the projects where we will buy parts and sell them back =
to the customerMeeting =
on Friday 4/8 with Aaron, Mike, and James to review =
furtherUpdate =
9/16 – James has had to take on AR and AP from Rea & Assoc. =
and as a result asked for an extension of two weeks on getting together =
on this with Mike.Update =
9/23 – James and Mike have this on hold – will reconvene =
next week.
WoodshopMike has =
developed a workflow for that areaWe need =
to build a system that:Tracks =
material used to the a-card for each container we build (cardboard, =
wood, for sure and possibly nails and or staples or whatever else is =
used?)We =
should take a pictures of the various containers we build so it is easy =
to see and understand what is being built and tie that to the container =
recordWe will =
need to build out a table for all the materials we will be buying (part =
number, description, quantity, price we pay)Inventory system that tracks beginning inventory + purchase =
– usage – scrap – returns =3D ending inventory for all =
parts we buyWe will =
need a way to cycle count / do physical inventories where we can adjust =
the on hand QTY as needed to match realityDevelop =
a change log for each part so we can see transactionally everything that =
takes place on parts we buy, tracking it from receipt through =
shipmentUpdate =
9/23 – Mike has started putting together screens for this. =
Jennifer and Mike to review together on =
Monday.
Labor =
efficiency reportWe need =
to know the amount of time (on average) that an employee is =
working on an a-card and the amount of time they are not working on any =
a-cards. Update =
9/16 – Mike and Aaron reviewed. We will wait for Aaron to give us =
an update at the next meeting.Update =
9/23 – James, Mike, and Aaron met on Thursday 9/22 and agreed on a =
path forward. Aaron is targeting something to review by next =
meeting.
Unique =
BOM volume report / International part volume reportCreate a =
report that allows to see how often we have billed for a unique BOM =
sorted most to least. When we expand the unique BOM we should see listed =
the International part numbers that by quantityUpdate =
9/16 – Aaron will review this with us at the next =
meeting.Update =
9/23 – Aaron updated the cost analysis so it can exclude woodshop =
as needed from certain reports. He also made a script that eliminates =
BOMS that were previously considered unique simply because they were in =
a different order. Completed according to =
Aaron
Thanks,
James
From: James Hartzler =
Sent: Friday, September 16, 2022 9:48 AM
To: =
Michael Reed <reed@rmrdevelopment.com>; =
Aaron Jones <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Friday 09/23 @ 9:30am EST / =
10:30am CST.
See below for updates =
from 09/16 meeting.
Screen =
scrape / Data import from excel reportMike is =
working on getting access to the remote Tolas sessions from our devices. =
Once he does he will work on screen scraping all the data on an a-card =
so we no longer have to have several people working to scan every a-card =
in to our systemUpdate =
8/18 – We have not heard from Navistar yet. We will continue to =
follow up to get what is needed.Update =
9/2 – UDO and supplier fields have been added to the excel report =
for receipts. We still need the package quantity field to be added to =
the report. We also need a report that is in the same format for Repack =
receipts. Mike will reach out by email to engage Navistar for these =
additional details / reports.Update =
9/9 – Mike sent him an email but has not heard back. Mike will =
follow back up today. We are pulling in the UDO and supplier fields on =
the import now that Aaron has made the update to the =
import.Update =
9/16 – Mike and Fernando will continue to try and reach Navistar =
for help. They have not responded yet.
New =
system to track the projects where we will buy parts and sell them back =
to the customerMeeting =
on Friday 4/8 with Aaron, Mike, and James to review =
furtherUpdate =
8/18 – Mike has made further progress. James and Mike need to =
still enter the historical data for the Ford of Clermont project to test =
this out.Update =
9/2 – Mike and James to review in the near future. Mike and James =
to connect the week of 9/5 to discuss further.Update =
9/9 – Mike and James to get together week of =
9/12Update =
9/16 – James has had to take on AR and AP from Rea & Assoc. =
and as a result asked for an extension of two weeks on getting together =
on this with Mike.
WoodshopMike has =
developed a workflow for that areaWe need =
to build a system that:Has a =
timeclock for each employee (instead of for each a-card) that follows =
them all day. The employee will then book their time against the =
different processes they helped onTracks =
labor to the a-cardTracks =
material used to the a-card for each container we build (cardboard, =
wood, for sure and possibly nails and or staples or whatever else is =
used?)The =
system needs to relate billing matrix number, international part number, =
container numberWe know =
the international part and the matrix code we have done in the past for =
each international part but we need to build a new table where we define =
the BOM for every container we make, assign every container a unique =
identifier / part numberHow will =
we gather this data / input it in to the system?We =
should take a pictures of the various containers we build so it is easy =
to see and understand what is being built and tie that to the container =
recordWe will =
need to build out a table for all the materials we will be buying (part =
number, description, quantity, price we pay)Inventory system that tracks beginning inventory + purchase =
– usage – scrap – returns =3D ending inventory for all =
parts we buyWe will =
need a way to cycle count / do physical inventories where we can adjust =
the on hand QTY as needed to match realityDevelop =
a change log for each part so we can see transactionally everything that =
takes place on parts we buy, tracking it from receipt through =
shipmentEach =
part we buy will need to be capable of having a serial number / batch =
code / date code so that if a part we buy is tracked in =
that fashion we can continue to track those parts in our system in the =
same manner from receipt through shipmentWe will =
need to build a vendor / supplier table where we can build out the =
vendor details for where we buy our parts fromWe will =
need a PO system where we can create POs and print them out to send them =
to the suppliersJames to =
get with CPA to determine how we will value inventory and use it =
(average cost, LIFO, FIFO)Update =
8/18 – Jennifer should have the third and final notebook entered =
and sent to Mike by the week of 8/22. She will send the second notebook =
to Mike today 8/18. She has already sent the first notebook. Mike will =
upload the first two notebooks to the system on 8/18. Woodshop will go =
live week of 8/22.Update =
9/2 – Woodshop is live. Jennifer has been testing with them and it =
is going pretty good. Repack in woodshop is not being processed through =
the system yet. The regular woodshop a-cards are being =
processed.Update =
9/9 – Mike has made some updates and everything seems to be ok. =
Mike to give Jennifer a call Monday 9/12 to discuss the process with her =
to see what it would take to get repack woodshop a-cards in the =
system.Update =
– 9/16 – Mike and Jennifer spoke. Jennifer is communicating =
details to Mike that he needs and Mike will review and update on our =
next call his thoughts for moving forward and incorporating repack =
woodshop into the time study =
system.
Labor =
efficiency reportWe need =
to know the amount of time (on average) that an employee is =
working on an a-card and the amount of time they are not working on any =
a-cards. Update =
8/18 – Repack is going live on the update that will allow multiple =
people to work on the same a-card. This should allow this report to =
start working for standard and repack areas. Woodshop will work once =
they start recording their data daily on the tablets.Update =
9/2 – It has been validated to work and is in use today for =
Repack, Standard, and Woodshop. However we need to set it up so that if =
a user is on multiple a-cards at the same time then their time is evenly =
split between the a-cards they had open and were working =
on.Update =
9/9 – Aaron and Mike to review week of 9/12. No update for =
today’s meeting.Update =
9/16 – Mike and Aaron reviewed. We will wait for Aaron to give us =
an update at the next meeting.
Unique =
BOM volume report / International part volume reportCreate a =
report that allows to see how often we have billed for a unique BOM =
sorted most to least. When we expand the unique BOM we should see listed =
the International part numbers that by quantityUpdate =
8/18 – This is Aaron’s primary focus. We should be able to =
review all of these reports by the meeting on 9/2.Update =
9/2 – Cost Analysis, BOM Volume, and BOM Winner Losers reports are =
available for review. We need to figure out what the material cost is =
for woodshop items so we can determine labor + material if we made money =
based on what we billed. Update =
9/9 – Aaron showed us the dashboard he is working on. We want to =
be able to include or exclude Woodshop a-cards from any report as =
needed. With Woodshop having material costs to factor in to things it =
could throw off our results if it is included in our reports. Aaron to =
work on figuring out if it is possible to eliminate the same BOM from =
looking like two unique BOMS simply because the underlying Matrix parts =
are the same but in a different order (i.e. FR1009_1BX1015_1 and =
BX1015_1FR1009_1 get counted as two unique BOMS when in reality that is =
only one unique BOM.Update =
9/16 – Aaron will review this with us at the next =
meeting.
Thanks,
James
From: James Hartzler =
Sent: Friday, September 9, 2022 11:59 AM
To: =
Michael Reed <reed@rmrdevelopment.com>; =
Aaron Jones <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Friday 09/16 @ 9:30am EST / =
10:30am CST.
See below for updates =
from 09/09 meeting.
Screen =
scrape / Data import from excel reportMike is =
working on getting access to the remote Tolas sessions from our devices. =
Once he does he will work on screen scraping all the data on an a-card =
so we no longer have to have several people working to scan every a-card =
in to our systemUpdate =
8/18 – We have not heard from Navistar yet. We will continue to =
follow up to get what is needed.Update =
9/2 – UDO and supplier fields have been added to the excel report =
for receipts. We still need the package quantity field to be added to =
the report. We also need a report that is in the same format for Repack =
receipts. Mike will reach out by email to engage Navistar for these =
additional details / reports.Update =
9/9 – Mike sent him an email but has not heard back. Mike will =
follow back up today. We are pulling in the UDO and supplier fields on =
the import now that Aaron has made the update to the =
import.
New =
system to track the projects where we will buy parts and sell them back =
to the customerMeeting =
on Friday 4/8 with Aaron, Mike, and James to review =
furtherUpdate =
8/18 – Mike has made further progress. James and Mike need to =
still enter the historical data for the Ford of Clermont project to test =
this out.Update =
9/2 – Mike and James to review in the near future. Mike and James =
to connect the week of 9/5 to discuss further.Update =
9/9 – Mike and James to get together week of =
9/12
WoodshopMike has =
developed a workflow for that areaWe need =
to build a system that:Has a =
timeclock for each employee (instead of for each a-card) that follows =
them all day. The employee will then book their time against the =
different processes they helped onTracks =
labor to the a-cardTracks =
material used to the a-card for each container we build (cardboard, =
wood, for sure and possibly nails and or staples or whatever else is =
used?)The =
system needs to relate billing matrix number, international part number, =
container numberWe know =
the international part and the matrix code we have done in the past for =
each international part but we need to build a new table where we define =
the BOM for every container we make, assign every container a unique =
identifier / part numberHow will =
we gather this data / input it in to the system?We =
should take a pictures of the various containers we build so it is easy =
to see and understand what is being built and tie that to the container =
recordWe will =
need to build out a table for all the materials we will be buying (part =
number, description, quantity, price we pay)Inventory system that tracks beginning inventory + purchase =
– usage – scrap – returns =3D ending inventory for all =
parts we buyWe will =
need a way to cycle count / do physical inventories where we can adjust =
the on hand QTY as needed to match realityDevelop =
a change log for each part so we can see transactionally everything that =
takes place on parts we buy, tracking it from receipt through =
shipmentEach =
part we buy will need to be capable of having a serial number / batch =
code / date code so that if a part we buy is tracked in =
that fashion we can continue to track those parts in our system in the =
same manner from receipt through shipmentWe will =
need to build a vendor / supplier table where we can build out the =
vendor details for where we buy our parts fromWe will =
need a PO system where we can create POs and print them out to send them =
to the suppliersJames to =
get with CPA to determine how we will value inventory and use it =
(average cost, LIFO, FIFO)Update =
8/18 – Jennifer should have the third and final notebook entered =
and sent to Mike by the week of 8/22. She will send the second notebook =
to Mike today 8/18. She has already sent the first notebook. Mike will =
upload the first two notebooks to the system on 8/18. Woodshop will go =
live week of 8/22.Update =
9/2 – Woodshop is live. Jennifer has been testing with them and it =
is going pretty good. Repack in woodshop is not being processed through =
the system yet. The regular woodshop a-cards are being =
processed.Update =
9/9 – Mike has made some updates and everything seems to be ok. =
Mike to give Jennifer a call Monday 9/12 to discuss the process with her =
to see what it would take to get repack woodshop a-cards in the =
system.
Labor =
efficiency reportWe need =
to know the amount of time (on average) that an employee is =
working on an a-card and the amount of time they are not working on any =
a-cards. Update =
8/18 – Repack is going live on the update that will allow multiple =
people to work on the same a-card. This should allow this report to =
start working for standard and repack areas. Woodshop will work once =
they start recording their data daily on the tablets.Update =
9/2 – It has been validated to work and is in use today for =
Repack, Standard, and Woodshop. However we need to set it up so that if =
a user is on multiple a-cards at the same time then their time is evenly =
split between the a-cards they had open and were working =
on.Update =
9/9 – Aaron and Mike to review week of 9/12. No update for =
today’s meeting.
Unique =
BOM volume report / International part volume reportCreate a =
report that allows to see how often we have billed for a unique BOM =
sorted most to least. When we expand the unique BOM we should see listed =
the International part numbers that by quantityUpdate =
8/18 – This is Aaron’s primary focus. We should be able to =
review all of these reports by the meeting on 9/2.Update =
9/2 – Cost Analysis, BOM Volume, and BOM Winner Losers reports are =
available for review. We need to figure out what the material cost is =
for woodshop items so we can determine labor + material if we made money =
based on what we billed. Update =
9/9 – Aaron showed us the dashboard he is working on. We want to =
be able to include or exclude Woodshop a-cards from any report as =
needed. With Woodshop having material costs to factor in to things it =
could throw off our results if it is included in our reports. Aaron to =
work on figuring out if it is possible to eliminate the same BOM from =
looking like two unique BOMS simply because the underlying Matrix parts =
are the same but in a different order (i.e. FR1009_1BX1015_1 and =
BX1015_1FR1009_1 get counted as two unique BOMS when in reality that is =
only one unique BOM.
Thanks,
James
From: James Hartzler =
Sent: Friday, September 2, 2022 3:25 PM
To: Michael =
Reed <reed@rmrdevelopment.com>; =
Aaron Jones <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Friday 09/09 @ 11:00pm EST =
(noon).
See below for updates =
from 09/02 meeting.
Screen =
scrape / Data import from excel reportMike is =
working on getting access to the remote Tolas sessions from our devices. =
Once he does he will work on screen scraping all the data on an a-card =
so we no longer have to have several people working to scan every a-card =
in to our systemUpdate =
8/18 – We have not heard from Navistar yet. We will continue to =
follow up to get what is needed.Update =
9/2 – UDO and supplier fields have been added to the excel report =
for receipts. We still need the package quantity field to be added to =
the report. We also need a report that is in the same format for Repack =
receipts. Mike will reach out by email to engage Navistar for these =
additional details / reports.
New =
system to track the projects where we will buy parts and sell them back =
to the customerMeeting =
on Friday 4/8 with Aaron, Mike, and James to review =
furtherUpdate =
8/18 – Mike has made further progress. James and Mike need to =
still enter the historical data for the Ford of Clermont project to test =
this out.Update =
9/2 – Mike and James to review in the near future. Mike and James =
to connect the week of 9/5 to discuss =
further.
WoodshopMike has =
developed a workflow for that areaWe need =
to build a system that:Has a =
timeclock for each employee (instead of for each a-card) that follows =
them all day. The employee will then book their time against the =
different processes they helped onTracks =
labor to the a-cardTracks =
material used to the a-card for each container we build (cardboard, =
wood, for sure and possibly nails and or staples or whatever else is =
used?)The =
system needs to relate billing matrix number, international part number, =
container numberWe know =
the international part and the matrix code we have done in the past for =
each international part but we need to build a new table where we define =
the BOM for every container we make, assign every container a unique =
identifier / part numberHow will =
we gather this data / input it in to the system?We =
should take a pictures of the various containers we build so it is easy =
to see and understand what is being built and tie that to the container =
recordWe will =
need to build out a table for all the materials we will be buying (part =
number, description, quantity, price we pay)Inventory system that tracks beginning inventory + purchase =
– usage – scrap – returns =3D ending inventory for all =
parts we buyWe will =
need a way to cycle count / do physical inventories where we can adjust =
the on hand QTY as needed to match realityDevelop =
a change log for each part so we can see transactionally everything that =
takes place on parts we buy, tracking it from receipt through =
shipmentEach =
part we buy will need to be capable of having a serial number / batch =
code / date code so that if a part we buy is tracked in =
that fashion we can continue to track those parts in our system in the =
same manner from receipt through shipmentWe will =
need to build a vendor / supplier table where we can build out the =
vendor details for where we buy our parts fromWe will =
need a PO system where we can create POs and print them out to send them =
to the suppliersJames to =
get with CPA to determine how we will value inventory and use it =
(average cost, LIFO, FIFO)Update =
8/18 – Jennifer should have the third and final notebook entered =
and sent to Mike by the week of 8/22. She will send the second notebook =
to Mike today 8/18. She has already sent the first notebook. Mike will =
upload the first two notebooks to the system on 8/18. Woodshop will go =
live week of 8/22.Update =
9/2 – Woodshop is live. Jennifer has been testing with them and it =
is going pretty good. Repack in woodshop is not being processed through =
the system yet. The regular woodshop a-cards are being processed. =
Labor =
efficiency reportWe need =
to know the amount of time (on average) that an employee is =
working on an a-card and the amount of time they are not working on any =
a-cards. Update =
8/18 – Repack is going live on the update that will allow multiple =
people to work on the same a-card. This should allow this report to =
start working for standard and repack areas. Woodshop will work once =
they start recording their data daily on the tablets.Update =
9/2 – It has been validated to work and is in use today for Repack =
Standard and Woodshop. However we need to set it up so that if a user is =
on multiple a-cards at the same time then their time is evenly split =
between the a-cards they had open and were working =
on.
Unique =
BOM volume report / International part volume reportCreate a =
report that allows to see how often we have billed for a unique BOM =
sorted most to least. When we expand the unique BOM we should see listed =
the International part numbers that by quantityUpdate =
8/18 – This is Aaron’s primary focus. We should be able to =
review all of these reports by the meeting on 9/2.Update =
9/2 – Cost Analysis, BOM Volume, and BOM Winner Losers reports are =
available for review. We need to figure out what the material cost is =
for woodshop items so we can determine labor + material if we made money =
based on what we billed.
Report =
to track a-cards that have time study VS a-cards that do =
notWe want =
to see the total number of a-cards that have time studies and the total =
number of a-cards that do not have time studies based on the invoice =
dateThis =
will allow us to be accountable to make sure that every a-card is =
getting a time studyUpdate =
8/18 – Mike said this one will be out there later today =
8/18.Update =
9/2 – This report is available and works today – closing the =
issue.
Clock to =
follow the person instead of the a-cardWe will =
pilot this approach in the woodshop part of the system we are building =
nowIf it =
goes well there we will consider moving to this approach everywhere and =
for all employeesUpdate =
8/18 – Mike pushed the final version on Thursday 8/18. Jennifer to =
test and validate if it works. Aaron will verify that the labor =
efficiency report is working.This issue is closed – time clock now =
follows the person in all areas.
Thanks,
James
From: James Hartzler =
Sent: Thursday, August 18, 2022 11:47 AM
To: =
Michael Reed <reed@rmrdevelopment.com>; =
Aaron Jones <jones@rmrdevelopment.com>=
; Fernando Landa <fernandolanda@dpksi.com>; =
Jennifer Hernandez <jenniferhernandez@dpksi.com>
Subject: RE: GoToMeeting Invitation – =
DiPk/RMR
Next meeting will be Friday 09/02 @ 12:00pm EST =
(noon).
See below for updates =
from 8/18 meeting.
Clock to =
follow the person instead of the a-cardWe will =
pilot this approach in the woodshop part of the system we are building =
nowIf it =
goes well there we will consider moving to this approach everywhere and =
for all employeesUpdate =
4/14 – still in processUpdate =
4/22 – users in database – still in =
processUpdate =
04/28 – Structure in place, need to get the screen in place =
– still in processUpdate =
5/5 – Framework on app is in place; still need to pilot – =
roughly 80% completeUpdate =
5/24 – New version to be pushed out 5/24 and this should be in =
placeUpdate =
5/31 – A new release will be pushed by end of =
weekEmployee =
between a-cardsCalling =
out disparities between what they enter versus what the system =
tracksUpdate =
6/7 – Aaron and Mike to review and propose a new idea / process =
for tracking timeUpdate =
6/14 – Need to complete the implementation of the new plan that =
Mike and Aaron developed. Should be able to focus on this and hope to =
have something to show by next meeting.Update =
6/21 – Nothing to show but should have it done by next =
week.Update =
6/28 – Should be complete by COB Thursday 6/30. Mike Reed to be =
onsite next week to implement.Update =
7/6 – Start testing the afternoon of 7/6. Provided there are no =
issues this will get moved to the resolved items list and dropped from =
the weekly follows.Update =
7/12 – This release has been published and we should be updating =
all tablets tomorrow Wednesday 7/13 – we still need to do the =
reporting that works with this feature as well – train users on =
adding new users on the fly tooUpdate =
7/26 – Everything is in place including adding new employees on =
the fly. Is currently in use. Still need to get the reporting added =
in.Update =
8/4 – Mike is working on the report with Jennifer. Mike is hoping =
to have the report done before he leaves on Friday =
8/5.Update =
8/12 – Mike can get this data on everything but re-pack for now =
until an update is made. Update to Re-pack will be made on the live site =
on Monday 8/15. The report when complete will allow us to see by =
individual where they worked and the total hours they worked against the =
various jobs / a-cards that day. This will allow us to determine the =
labor efficiency – so for example we have 7 hours recorded against =
a-cards but we paid the employee for 8 hours that tells us their labor =
efficiency.Update =
8/18 – Mike pushed the final version on Thursday 8/18. Jennifer to =
test and validate if it works. Aaron will verify that the labor =
efficiency report is working.
Screen =
scrape / Data import from excel reportMike is =
working on getting access to the remote Tolas sessions from our devices. =
Once he does he will work on screen scraping all the data on an a-card =
so we no longer have to have several people working to scan every a-card =
in to our systemUpdate =
4/14 – still in processMike =
will reach out to Brian to do a screen share – currently this does =
not workUpdate =
4/22 – still in process – Rittu is requesting Tolas access =
for Mike, Aaron, and James’ accountsUpdate =
4/28 – Mike was able to log in to Tera – provide an update =
on screen scrape next week. Also request was made to give us access to =
reflections.Update =
5/5 – Mike to review and see if he has access to Reflections and =
if that will work – Tera Term does not appear to work with screen =
scrape unless locally installedUpdate =
5/24 – Emails sent to customer, need help finding the a-card data =
in TolasUpdate =
5/31 – Mike validated that the report we are getting now is not =
for us – Fernando to setup a meeting with Navistar rep and Mike to =
communicate what report we need – Need them to email reports to =
Mike and Aaron onlyUpdate =
6/7 – Mike to check with Navistar rep on getting Supplier, Package =
QTY, and UDO QTY columns added to the excel report – Aaron to =
update the supplier drop down field on the edit screen so it queues up =
only the supplier that match that part. If there is only one supplier it =
should default that supplier.Update =
6/14 – Aaron working on it, should be put on the dev site for =
testing between 6/14 – 6/17Update =
6/21 – Everything is on the live and DEV site to use. Still need =
overages and shortages on the excel report from Navistar. Have contacted =
Robert @ Navistar and waiting for his feedback. Jennifer will start =
scanning in the excel file and will report any issues. This should save =
time on data entry.Update =
6/28 – Fernando did speak with Robert at Navistar. We still need =
to get Repack on the excel file and the supplier and UDO quantities =
added to the standard a-card excel file. Mike and Fernando to continue =
to reach out until this is resolved.Update =
7/6 – We need calculate # of Packages differently. Currently we =
are looking at how many packages we shipped / billed last time and using =
that number on the new a-card received. What we need to do instead is =
dynamically take the number received divided by the multiplier (or =
pieces received per pack / unique BOM we ship) to calculate the number =
of packages each new a-card received will have until we can get the =
excel import file to include # of packages / unique BOMS we will ship =
out. Mike / Fernando will contact Navistar to request # of packages be =
added to the excel file they send us.Update =
7/12 – Fernando said he had contacted Navistar and made the =
request but that the data we need added to the excel file so we can =
import Repack receipts and the field “Package Marks” on all =
a-cards so we know the pack out QTY for each a-card is still missing. =
Fernando to request a conference call with Navistar and Mike to =
communicate what we need added to the excel file to make things work for =
us.Update =
7/26 – Fernando said that the guy he works with has not responded. =
Fernando and Mike will keep trying to reach out to him, or Navistar in =
general, until we touch base with them to request these items be added =
to the import files.Update =
8/4 – Fernando and Mike will also share with Navistar the import =
file and all the mistakes the import file has so hopefully they correct =
that report for us and eliminate erroneous information that is on the =
report.Update =
8/12 – We continue to reach out to Navistar but he is not =
responding to Fernando or Mike (emails or Teams messages). Will continue =
to reach out. Still need to show them an import file and all the =
mistakes the file has that is creating bad data when we import. We also =
need repack so we can import. Lastly we need the pack quantity field on =
the import file.Update =
8/18 – We have not heard from Navistar yet. We will continue to =
follow up to get what is needed.
New =
system to track the projects where we will buy parts and sell them back =
to the customerMeeting =
on Friday 4/8 with Aaron, Mike, and James to review =
furtherUpdate =
4/14 – still in process Mike =
Reed will work on that Friday 4/15On hold =
pending further reviewUpdate =
4/28 – Meeting Mon @ 10:30am to discuss furtherUpdate =
5/5 – work has been completed; will review while onsite, still in =
processUpdate =
5/24 – Updated access DB to be sent to JamesUpdate =
5/31 – we will revisit 6/16 or 6/17 and possibly use web app =
instead of access DB Update =
6/7 – Mike made good progress, should have something to review by =
next meetingUpdate =
6/14 – Mike has all the data structures in place he just needs to =
build the screens on it – should have a working model by Thursday =
6/16 or Friday 6/17Update =
6/28 – Mike and James to meet Friday 7/1 to continue working on =
thisUpdate =
7/6 – James and Mike to meet next Friday in person to continue =
working on this.Update =
7/12 – James and Mike getting together Friday to continue working =
on this.Update =
7/26 – Mike should have this in good shape by Friday when he and =
James meet.Update =
8/4 – James and Mike to review next Friday 8/12 and to input the =
existing data to validate that everything works.Update =
8/12 – Minor changes still need implemented. It should be ready to =
data enter the existing project from start to finish on Thursday =
8/18.Update =
8/18 – Mike has made further progress. James and Mike need to =
still enter the historical data for the Ford of Clermont project to test =
this out.
WoodshopMike has =
developed a work flow for that areaWe need =
to build a system that:Has a =
timeclock for each employee (instead of for each a-card) that follows =
them all day. The employee will then book their time against the =
different processes they helped onTracks =
labor to the a-cardTracks =
material used to the a-card for each container we build (cardboard, =
wood, for sure and possibly nails and or staples or whatever else is =
used?)The =
system needs to relate billing matrix number, international part number, =
container numberWe know =
the international part and the matrix code we have done in the past for =
each international part but we need to build a new table where we define =
the BOM for every container we make, assign every container a unique =
identifier / part numberHow will =
we gather this data / input it in to the system?We =
should take a pictures of the various containers we build so it is easy =
to see and understand what is being built and tie that to the container =
recordWe will =
need to build out a table for all the materials we will be buying (part =
number, description, quantity, price we pay)Inventory system that tracks beginning inventory + purchase =
– usage – scrap – returns =3D ending inventory for all =
parts we buyWe will =
need a way to cycle count / do physical inventories where we can adjust =
the on hand QTY as needed to match realityDevelop =
a change log for each part so we can see transactionally everything that =
takes place on parts we buy, tracking it from receipt through =
shipmentEach =
part we buy will need to be capable of having a serial number / batch =
code / date code so that if a part we buy is tracked in =
that fashion we can continue to track those parts in our system in the =
same manner from receipt through shipmentWe will =
need to build a vendor / supplier table where we can build out the =
vendor details for where we buy our parts fromWe will =
need a PO system where we can create POs and print them out to send them =
to the suppliersJames to =
get with CPA to determine how we will value inventory and use it =
(average cost, LIFO, FIFO)Update =
4/14 – Still in processUpdate =
4/22 – Rylan will start on programming next week – hope to =
have something to review by meeting time next weekUpdate =
4/28 – Still in process – reviewed screens with Aaron on how =
to enter parts, BOMs, receipts, and looked at hoe the perpetual =
inventory by part will work – need to finish APIs that are in =
progressUpdate =
5/5 – will review while onsite, still in =
processUpdate =
5/24 – should go live while Mike is onsite the week of =
5/23Update =
5/31 – Mike has the screen to build a box on the fly in woodshop, =
done by EOD – once released the woodshop team should be able to =
start using the tablets dailyUpdate =
6/7 – Mike has the app screen done to create the containers – =
Jennifer and Mike to review together so we can train the woodshop staff =
– Targeting Thursday 6/9 as go live date to begin =
usingUpdate =
6/14 – Mike to get with Jenny to go through what the employees =
will need to do – Should be able to have woodshop employees using =
tablets beginning Monday 6/19.Update =
6/21 – Mike needs to add in one thing yet (not related to woodshop =
– enable a feature previously disabled) That should take place =
6/21 and we should be using the tablets in woodshop by =
6/22.Update =
6/28 – Mike to be onsite next week and implement the tablets in =
woodshopUpdate =
7/6 – Mike will begin implementing 7/7 while =
onsiteUpdate =
7/12 – this will go in to effect and be used by employees on =
Wednesday 7/13Update =
7/26 – Mike will review with Jennifer tomorrow Wednesday 7/27 to =
determine how this process is goingUpdate =
8/4 – Mike and Jennifer to review. We have not started using =
tablets in woodshop yet however, we believe these will be in place =
before Mike leaves on Friday.Update =
8/12 – Jennifer will send Mike an excel file with the containers =
list so Mike can import that in to the system so the employees do not =
need to build them on the fly. Then the employees will be able to use =
the tablets to track their work in the woodshop area. Jennifer has to =
manually type the woodshop parts from 3 different hand written notebooks =
so this will take a few days to get totally complete.Update =
8/18 – Jennifer should have the third and final notebook entered =
and sent to Mike by the week of 8/22. She will send the second notebook =
to Mike today 8/18. She has already sent the first notebook. Mike will =
upload the first two notebooks to the system on 8/18. Woodshop will go =
live week of 8/22.
Report =
to track a-cards that have time study VS a-cards that do =
notWe want =
to see the total number of a-cards that have time studies and the total =
number of a-cards that do not have time studies based on the invoice =
dateThis =
will allow us to be accountable to make sure that every a-card is =
getting a time studyUpdate =
6/14 – Aaron is working on this Update =
6/21 – It is done and in place. Mike and Aaron need to release a =
new version that will correct the issue they were seeing where time =
studies were not being documented because they could not do multiple =
time studies on a tablet at once.Update =
6/28 – Once Mike implements new release next week we should be =
able to start using this report.Update =
7/6 – Still to be released should be able to start using this =
report week of 7/11Update =
7/12 – Should be able to review data on next week’s =
callUpdate =
7/26 – Aaron and Mike will talk about this on Monday and we should =
be ready to go on this soon. In theory all a-cards should be getting a =
time study now and none should be getting through without a time =
study.Update =
8/4 – Mike is working on this report now and validating it. =
Currently not ready to use however, the goal is to have a usable report =
by the time Mike leaves on Friday. Update =
8/12 – So a working version of this report exists. However Mike =
said the data in the report needs to be validated so we know it is =
accurate. Mike said we can see this report by next =
meeting.Update =
8/18 – Mike said this one will be out there later today =
8/18.
Labor =
efficiency reportWe need =
to know the amount of time (on average) that an employee is =
working on an a-card and the amount of time they are not working on any =
a-cards. Updated =
6/28 – We will work on creating on this – a report by date =
range that lists all employees and then time on a-card and time not on =
a-card with a column that shows the efficiency for each employee during =
that period.Update =
7/6 – Should be able to start using this week of =
7/18Update =
7/12 – Should be able to do this next week as =
well.Update =
7/26 – This will be worked on by Mike and Aaron. Should have =
completed once the billing system update is done.Update =
8/4 – In progress, Mike is working on getting all the labor input =
correctly on the tablets. The goal would be to have something to review =
by next Friday’s meeting on 8/12Update =
8/12 – Repack does not currently allow us to choose multiple people to =
work on one a-card at the same time. This needs to be resolved before =
this report will work correctly. That will be resolved on Monday 8/15 =
with the live DB update. We should be able to see a report by next =
meeting.Update =
8/18 – Repack is going live on the update that will allow multiple =
people to work on the same a-card. This should allow this report to =
start working for standard and repack areas. Woodshop will work once =
they start recording their data daily on the =
tablets.
Unique =
BOM volume report / International part volume reportCreate a =
report that allows to see how often we have billed for a unique BOM =
sorted most to least. When we expand the unique BOM we should see listed =
the International part numbers that by quantityUpdate =
6/28 – Aaron to work on creating these reports week of =
7/4Update =
7/6 – Aaron is estimating this will be something we can look at =
the week of 7/18Update =
7/12 – Aaron to work on new report style discussed on call – =
possible we could review together by weeks end before Aaron leaves for =
vacationUpdate =
7/26 – Aaron said this will be updated once the billing system has =
been updated.Update =
8/4 – We have a working model on the DEV site that Aaron showed =
us. Once the billing system update goes live we should be able to use =
the report we saw to show us how many times we have billed for a unique =
BOMUpdate =
8/12 – Changes need to be released, will take place on Monday 8/15 =
after billing is complete. Will meet with Aaron to determine fields and =
layout for this report.Update =
8/18 – This is Aaron’s primary focus. We should be able to =
review all of these reports by the meeting on =
9/2.
Thanks,
James
FW: ROCK to Planning Center Questions
Hi Shea – Can we schedule a call later =
on today or tomorrow to discuss? We can help you with this. Let me know =
your availability. Thanks!
From: Shea Bates =
<sbates@kensingtonorlando.org>
Sent: Tuesday, August 8, =
2023 8:45 AM
To: Michael Reed <reed@rmrdevelopment.com>; =
missy@rmrdevelopment.com
Subject: Re: ROCK to Planning Center =
Questions
HI! Just following up regarding helping us =
switch over our branding on ROCK. We need to change out our colors and =
logos and wording on our communication templates. Basically, anything =
that is public facing, we need to update the look. =
Please let me know if =
this is something you all can assist with and what the cost would be and =
process.
We officially are =
branded new on Sept 10th so we would need everything to =
reflect new branding by then.
Best-
Shea Bates | Executive Assistant
K E N S I N G T O N C H U R C H =
O R L A N D O
Office: =
407.554.1210 | Mobile:=
407.694.7274
From: Shea Bates <sbates@kensingtonorlando.org=
>
Date: Thursday, July 27, 2023 at 11:38 AM
To: =
Michael Reed <reed@rmrdevelopment.com>, =
missy@rmrdevelopment.com =
<missy@rmrdevelopment.com>=
Subject: Re: ROCK to Planning Center =
Questions
Thanks! Sorry for the delay in responding. =
We will need a few =
things:
We are rebranding as a church and will need =
all of our public “skins” changed to reflect new branding =
including communication templates, giving page, registration/events =
page
The change over will =
launch on Sunday, September 10th and would like for =
everything to be reflective of new brand as of then. =
What do you need from =
us to help? I can send all new logos and colors when needed. =
Best-
Shea Bates | Executive Assistant
K E N S I N G T O N C H U R C H =
O R L A N D O
Office: =
407.554.1210 | Mobile:=
407.694.7274
From: Michael Reed <reed@rmrdevelopment.com>Date: Tuesday, May 30, 2023 at 4:02 PM
To: Shea Bates =
<sbates@kensingtonorlando.org=
>
Cc: ‘Missy Kapper’ <missy@rmrdevelopment.com>=
Subject: FW: ROCK to Planning Center =
Questions
Sure. We can =
help you. Just let me know what you need done. =
Thanks!
=
From: Missy Kapper <missy@rmrdevelopment.com>=
Sent: Tuesday, May 30, 2023 2:15 PM
To: reed@rmrdevelopment.com
Subject: FW: ROCK to Planning Center =
Questions
=
=
=
From: Shea Bates <sbates@kensingtonorlando.org=
>
Sent: Tuesday, May 30, 2023 12:30 PM
To: =
missy@rmrdevelopment.com
=
Subject: ROCK to Planning Center =
Questions
=
Hi! =
=
We are =
looking at moving a lot of our database elements from ROCK to Planning =
Center. However, some things we will need to still utilize ROCK for but =
will need to format the look of the landing pages differently. Is this =
something you all could help us with?
=
=
=
Shea Bates | Executive Assistant
K E N S I N G T O N C H U R C H =
O R L A N D O
Office: =
407.554.1210 | Mobile:=
407.694.7274
=