| New Equipment
 Click on the thumbnails below to get a
better look at following pieces of machinery. |
|
Top
|
GRT UTILICORP
SELF-CONTAINED DRIVER
Available in two lift cylinder configurations
single lift cylinder with corresponding level
cylinder or dual lift cylinders
36" fore and aft movement
245 degree turntable radius
Optional boom lengths
available - 13' 10",
15'6" and
18"
Hammer weight range from 1,000 - 2,000 lb.
Cable reel standard
Drviving capacity thru 10x10
wood posts
with standard foot
Optional remote drive for
truck
Optional foot for 12x12 wood
posts
|
|
Top
|
GRT UTILICORP
SELF-CONTAINED PNEUMATIC ROCK DRILL
Drilling
capability of 3-24 inch diameter holes,
depth 3-20 foot
Steel
flatbed with turntable, fore and aft
movement
Machine
has capability of driving steel guardrail
posts
Designed
for rugged rock drilling
Optional
remote control
|
|
Top
|
GRT UTILICORP HEAVY DUTY
COMBINATION
DRIVER ATTACHMENT (with pre-bore foot design
adaptable to GRT Utilicorp HD-25, MD-30, B7 Sterling
machines and other pressure diggers)
Square
hammer drop weight 1,000- 1,500 lbs.
Foot
operates independent of Kelly bar
Accepts
up to 16" auger with foot - up to 42" auger
without foot
Rigid
square tube design on driver frame
High
capacity oil system for continued fast hammer
cycle time
Standard
post puller with heavy duty cylinder
Post
driver will handle guardrail post, up to and
including 10x10 wood posts
|
|
Top
|
GRT UTILICORP HD-25
PRESSURE DIGGER Standard
John Deere diesel engine - Also available
optional gas engine
Available with power shift or hydrostatic transmission
Steel
flatbed with stacked drive
Turnable, fore and aft movement
Large
capacity oil system
Accepts
auger sizes up to 42 inches
Kelly
bar dimension 2½ x 2½ lengths 13-20 feet
Optional
rear outriggers
Winch
and pole setter packages
|
Top |
GRT UTILICORP UTHD-30 Pressure Digger
Standard diesel engine
Available with power shift or hydrostatic transmission
Steel
flatbed with stacked drive
Turntable, fore and aft movement
Large
capacity oil system
Accepts
auger sizes up to 72 inches
Kelly
bar dimension 3 X 3 lengths 17-40 feet
Optional outriggers
Winch
and pole setter packages
|
Top |
GRT UTILICORP UTMD-30 Pressure Digger
Standard diesel engine
Available with power shift or hydrostatic transmission
Steel
flatbed with stacked drive
Turntable, fore and aft movement
Large
capacity oil system
Accepts
auger sizes up to 60 inches
Kelly bar dimension 3 X 3 lengths 17-25 feet
Optional rear outriggers
Winch and pole setter packages
A 3" kelly bar machine that can be mounted on a single axle truck and
meet the legal axle weight limits |
|
Top
|
GRT UTILICORP HDD 15
Drop
hammer with pre-drill plus auxiliary arm drill
Standard
John Deere diesel engine
Large hydraulic
pump system
Steel
flatbed with turntable, fore and aft movement
Joy
stick controls
Optional
remote control
|
|
Top
|
GRT UTILICORP
SELF-CONTAINED POST DRIVER DRILL ATTACHMENT
Post
driver attachment Model 5060 mounts onto your
self-contained post driver.
Hole diameter range 6-16
inches; hole depth to 60 inches
Post
driver drill has hydraulic down pressure
Drill
has up to 5,000 ft lbs. of torque
|
|
Top |
GRT UTILICORP
MAINTENANCE MACHINE
Truck mounted
650 lb Hammer
Post puller
Optional hydraulically driven drill attachment
Optional truck bed to carry guard rail sections, posts, hardware & tools
Optional truck mounted crane to lift guard rail sections.
Optional air compressor to operate air tools
Optional headache rack |
